Only if you wrench them down. And they seem to have clamps for just about any type of metal roof you can imagine on their website. http://www.s-5.com/clamps/index_1048.cfm
-- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Chuck McCown" <[email protected]> To: [email protected] Sent: Wednesday, September 14, 2016 11:53:56 AM Subject: Re: [AFMUG] Drilling into roof Do those clamps smash the seam flat? -----Original Message----- From: Christopher Tyler Sent: Wednesday, September 14, 2016 10:38 AM To: [email protected] Subject: Re: [AFMUG] Drilling into roof For example... -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Christopher Tyler" <[email protected]> To: [email protected] Sent: Wednesday, September 14, 2016 11:36:08 AM Subject: Re: [AFMUG] Drilling into roof They make clamps for metal roofs, so you don't have to drill into them, non-penetrating. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: "Ken Hohhof" <[email protected]> To: [email protected] Sent: Wednesday, September 14, 2016 11:24:51 AM Subject: Re: [AFMUG] Drilling into roof Yeah, but you live in an area with those red tile roofs, right? We are starting to get metal roofs on houses, and I'm the same way, I won't lag into those. Plus they reflect RF. -----Original Message----- From: Gilbert T. Gutierrez, Jr. Sent: Wednesday, September 14, 2016 11:11 AM To: [email protected] Subject: Re: [AFMUG] Drilling into roof We will not drill into a roof. If a roof penetration is necessary, we have the customer's roofer make it so that we do not own it. Gilbert Phoenix Internet On 9/14/2016 8:18 AM, TJ Trout wrote: > > These days mounting a tripod on someone's roof makes me real nervous even > though I've done hundreds before. Does anyone have a no roof drilling > policy? Or am I just being too careful? >
