I'm not saying this is the same problem....but I have a situation where
a Trango Apex Lynx loses link to a CCR 1036. The SFP interface on the
router says there's link, but the SFP interface on the Trango says there
isn't. The problem (in my case) occurs any time the Trango loses power.
I can restore service by rebooting the CCR, unplugging and reconnecting
the fiber cable, or disabling and re-enabling the SFP interface. In
this case I didn't have a good picture of what was happening at first
because when it was happening I didn't have remote access to see the
condition of everything.
The Apex Lynx has the JDSU SFP module sold by Trango. I've duplicated
the problem with 4 different SFP's in the CCR (Mikrotik brand, Maxxwave,
JDSU, and Finisar), but I haven't tried changing the SFP in the Trango.
I don't know how common this issue is....it only became apparent after a
UPS failed.
------ Original Message ------
From: "TJ Trout" <[email protected]>
To: [email protected]
Sent: 10/20/2016 2:30:29 PM
Subject: [AFMUG] CRS with sfp lockup
I have a mikrotik CRS210 with a non-mikrotik sfp which locked up last
night, Not sure if it was the CRS or the sfp...
Anyone encountered this and have a solution?
