http://www.dummies.com/programming/networking/cisco/spanning-tree-protocol-stp-and-portfast/
BTW, you haven’t had fun until you’ve remotely created a bridge loop and had to drive out to unplug a cable to stop the nightmare. From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Tuesday, October 25, 2016 11:11 AM To: [email protected] Subject: Re: [AFMUG] stp I just learned the other day thanks to Steve the Mikrotik software bridges are (R?) STP by default. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 25, 2016 at 12:07 PM, Bill Prince <[email protected] <mailto:[email protected]> > wrote: Actually Netonix (one t, no r). I don't know that I would leave it on, but I don't know how you're using it. https://www.netonix.com/wisp-switch.html bp <part15sbs{at}gmail{dot}com> On 10/25/2016 9:04 AM, Josh Reynolds wrote: Nettonix. You could always leave it on... If your access network is layer2 up to that switch, it could help. On Oct 25, 2016 11:03 AM, "CBB - Jay Fuller" <[email protected] <mailto:[email protected]> > wrote: just discovered on one of our nettronix switches spanning tree protocol was enabled. we've run this switch probably four months - no real side effects - but i don't run stp anywhere else. any reason to leave this on? thanks
