Yep. -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Jay Weekley Sent: Tuesday, October 25, 2016 11:45 AM To: [email protected] Subject: Re: [AFMUG] stp
Or set an AP to sm mode without changing the color code which brought down 2 towers. CBB - Jay Fuller wrote: > oh, i've done that. one access point connecting to one subscriber > module back in the days when we used 900 mhz for everything (backhaul > and access points). 45 minute drive. fun times! > > ----- Original Message ----- > *From:* Ken Hohhof <mailto:[email protected]> > *To:* [email protected] <mailto:[email protected]> > *Sent:* Tuesday, October 25, 2016 11:18 AM > *Subject:* Re: [AFMUG] stp > > > http://www.dummies.com/programming/networking/cisco/spanning-tree-prot > ocol-stp-and-portfast/ > > BTW, you haven’t had fun until you’ve remotely created a bridge > loop and had to drive out to unplug a cable to stop the nightmare. > > *From:*Af [mailto:[email protected]] *On Behalf Of *Josh Luthman > *Sent:* Tuesday, October 25, 2016 11:11 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] stp > > I just learned the other day thanks to Steve the Mikrotik software > bridges are (R?) STP by default. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Oct 25, 2016 at 12:07 PM, Bill Prince <[email protected] > <mailto:[email protected]>> wrote: > > Actually Netonix (one t, no r). I don't know that I would > leave it on, but I don't know how you're using it. > > https://www.netonix.com/wisp-switch.html > > bp > > <part15sbs{at}gmail{dot}com> > > On 10/25/2016 9:04 AM, Josh Reynolds wrote: > > Nettonix. > > You could always leave it on... If your access network is > layer2 up to that switch, it could help. > > On Oct 25, 2016 11:03 AM, "CBB - Jay Fuller" > <[email protected] > <mailto:[email protected]>> wrote: > > just discovered on one of our nettronix switches > spanning tree protocol was enabled. > > we've run this switch probably four months - no real > side effects - but i don't run stp anywhere > > else. any reason to leave this on? > > thanks >
