I know it would not be a good idea to run PMP450 and PTP450 on same frequency but it sure would be nice if it allowed the next adjacent frequency to be used. We run multiple 5ghz PTP450i synced masters's on same frequency in different directions on same tower all the time. Keep them on one side of band and PMP450i's on other.
On Thu, Oct 27, 2016 at 5:20 PM, Jon Langeler <[email protected]> wrote: > Yeah. I never tried it before. It's not an awesome idea. But if the customer > pays $1500 for the install, we thought we would try a PTP in their > direction. 900MHz :-) > > Jon Langeler > Michwave Technologies, Inc. > > > On Oct 27, 2016, at 4:35 PM, Adam Moffett <[email protected]> wrote: > > Yeah....I'm curious who/what led you to believe otherwise. > > Did Cambium sales or support ever say that a PTP could sync with a PMP? > > > On 10/27/2016 4:23 PM, George Skorup wrote: > > The other problem since the beginning of time with Canopy style PTPs is that > the master starts up in beaconing mode with a max range of like 120 miles > and waits for a BHS reg attempt then does auto-ranging and shifts the > timing. So yeah, it's pretty much impossible. > > On 10/27/2016 3:18 PM, Sean Heskett wrote: > > that's been true since the beginning of time. > > you can get it close with 50% downlink on the AP and then use the frame > calculator to match the air delay parameter to the BHS. not easy at all but > you could probably get it to work. > > your best bet is to use different bands for PMP and PTP tho. > > -Sean > > > On Thu, Oct 27, 2016 at 12:37 PM, Jon Langeler <[email protected]> > wrote: >> >> I don't think their support department understands the concept of sync. >> But as of now we have given up on PTP products syncing 100% with PMP >> products. Oh well >> >> Jon Langeler >> Michwave Technologies, Inc. >> > > >
