Those were good for pounding nails when you couldn't find a hammer.
bp
<part15sbs{at}gmail{dot}com>
On 11/7/2016 6:31 AM, Chuck McCown wrote:
Even worse... unless you need to inflict blunt force trauma
*From:* Josh Luthman
*Sent:* Monday, November 07, 2016 7:30 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] 450m force 200 equivalent?
What about the Moto Lens? =P
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Nov 7, 2016 at 9:26 AM, Chuck McCown <[email protected]> wrote:
Some old people cling to inferior technology...
*From:* Ken Hohhof
*Sent:* Sunday, November 06, 2016 8:28 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] 450m force 200 equivalent?
Oh, right, Stinger. Chuck will probably ban me for mentioning it,
but there’s also the CLIP, we actually use a bunch of them.
Assembly time is about 2 seconds, it actually takes longer to get
it out of the box, but on the plus side the boxes are great as
parts bins.
*From:*Af [mailto:[email protected]] *On Behalf Of *Sean Heskett
*Sent:* Sunday, November 6, 2016 9:22 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] 450m force 200 equivalent?
For now you can use the 450SM bare, with a stinger or in a
reflector, 450d(similar to force200) or 450i(way too expensive).
Q1 2017 (which actually probably means late April or mid May 2017
;-) there will be a wide band 450sm that does 4.9-6ghz.
-Sean
On Sunday, November 6, 2016, Dev <[email protected]> wrote:
I got lost figuring out what subs to use for the 450m, is
there something like a force 200 which we use for ePMP, but
for 450m gear which can take advantage of its performance?
Buying a separate reflector and old subs seems annoying. I
like the simplicity of the Force 180/200 for installation.
