I don't think these support SNMP write (despite the UI/CLI saying so...) It's possible, as they are an entirely different product core from everything else... but if they do support it, I'd be surprised if (A) it was correctly exposed, and (B) write was correctly implemented. If $both == TRUE; then you sir have hit the lottery.
On Nov 7, 2016 2:00 PM, "Justin Marshall" <[email protected]> wrote: Hi, I’m looking for the SNMP OID’s for POE config on the UBNT EdgePoint S16. Specifically the ones that would let you disable/enable passive24v on a specific port. I tried an snmpwalk, but without a MIB there’s a lot to dig through. I actually found a thread on UBNT’s forums that say you have to retrieve them from the filesystem itself (https://community.ubnt.com/ t5/EdgeMAX/SNMP-MIB-File/td-p/464763), but can’t figure out how to actually get at the filesystem. SSH & Telnet both yield “(UBNT EdgeSwitch) (Config)#” prompts with no real way to get underneath (unless it’s so obvious I’m just somehow missing it) Can anyone point me in the right direction? If not… Has anyone had luck with Net::Telnet and the Edgepoint S16? I’ve not been able to get a script to get past “configure” (nothing but timeouts, even when matching the specific prompt) Thanks, Justin [email protected]
