new AP is on order, if I recall I think that this unit showing problems was purchased on EBAY so I am wondering if there was a reason this unit was on Ebay in the first place.
On Mon, Dec 19, 2016 at 10:59 AM, That One Guy /sarcasm < [email protected]> wrote: > wrap the whole radio and antenna in aluminum foil to keep the heat in. > > seriously though, do you give subscribers any access to the units? If so, > I wonder if having them run a bunch of link speedtests could generate > enough processing to warm the unit > > On Mon, Dec 19, 2016 at 9:54 AM, Kurt Fankhauser <[email protected] > > wrote: > >> Seems that the colder it is the more frequent the flapping is. I doubt >> its the RJ45 ends since I tried a different cable run on the tower and >> still showing the same issue. >> >> On Mon, Dec 19, 2016 at 10:42 AM, George Skorup <[email protected]> >> wrote: >> >>> I would try new RJ45s on both ends. If that's not it, then swap it and >>> RMA if it's still under warranty. >>> >>> >>> On 12/19/2016 9:35 AM, Kurt Fankhauser wrote: >>> >>>> I have a 3.65ghz 450 AP that was running flawless for over 6 months >>>> until we got our first really cold spell last week, temps dropped to near 0 >>>> degrees a couple nights back to back and when I woke up one morning the AP >>>> was dropping offline. Logged into the Mikrotik 2011 and it showed Ethernet >>>> was flapping. (was originally going through a Sync Injector). I had an old >>>> FSK AP going through the same sync injector and wasn't showing any >>>> problems. I tried switching the ports on the sync injector, changed ports >>>> on RB2011, eliminated sync injector and used a standard Canopy SM power >>>> supply. Finally I even switched the known good Ethernet cable from the FSK >>>> AP to the 450 and the port is still flapping. Won't lock to 10-baseT >>>> either. I am thinking at this point that I am going to have to replace the >>>> AP. >>>> >>> >>> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
