The boards are exactly the same size, so it doesn't involve any mods, but you might need to cut out some holes, depending on the specific model of 2011 (if they don't have sfp, etc.)... but I think all of the 2011's do have knockouts for everything, so it's pretty simple.
On Jan 8, 2017 8:22 PM, "Ken Hohhof" <[email protected]> wrote: > I assume he is scavenging the case from a 2011 and slipping the 3011 into > it. I’ve wondered if that would work, I guess the answer is yes. Since > I’m replacing 2011’s with 3011’s, that would be a viable approach. > > > > Is it that simple, or does it involve some mods? > > > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Baird > *Sent:* Sunday, January 8, 2017 8:05 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] RB3011 > > > > If you can't fit the rackmount form-factor in your enclosure, it seems > pretty logical to me. > > > > On Sun, Jan 8, 2017 at 8:50 PM, Josh Reynolds <[email protected]> > wrote: > > ... but why :) > > On Sun, Jan 8, 2017 at 7:40 PM, Mathew Howard <[email protected]> > wrote: > > To fit in boxes that are too small for the rackmount case. > > > > On Jan 8, 2017 7:17 PM, "Josh Reynolds" <[email protected]> wrote: > >> > > >> Why are you replacing their cases? > >> > >> On Jan 8, 2017 7:15 PM, "Mathew Howard" <[email protected]> wrote: > >>> > >>> We have a few running. No problems with current firmware... My only > >>> complaint is that they don't sell one in a desktop case, and I'm > running out > >>> of 2011's to gut... > >>> > >>> On Jan 8, 2017 7:04 PM, "Ken Hohhof" <[email protected]> wrote: > >>>> > >>>> Works as advertised, once I upgraded firmware. It was really hosed > with > >>>> the shipping firmware but they’ve probably fixed that by now. > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> From: Af [mailto:[email protected]] On Behalf Of Jason McKemie > >>>> Sent: Sunday, January 8, 2017 6:57 PM > >>>> To: [email protected] > >>>> Subject: [AFMUG] RB3011 > >>>> > >>>> > >>>> > >>>> Anyone using these? Good, bad, ugly? > >>>> > >>>> > >>>> > >>>> Also, I'm looking to power one from a 48v Eltek setup, any > >>>> recommendations on a DC/DC converter? > > >
