Shouldn't be any need to replace the SAF links... that setup sounds like it could be workable to me, but I'm not a frequency coordinator... I'd say it's certainly worth talking to a frequency coordinator and see if they can make it work.
On Tue, Jan 17, 2017 at 11:56 AM, Paul McCall <[email protected]> wrote: > On the tower in question, we have (2) existing 11 Ghz radios on 90 ft. > tower > > > > 1. 85 ft. up facing 208 degrees SAF Lumina 56 Mhz license presently > 2. 76 ft. up facing 287 degrees SAF Lumina 56 Mhz license presently > > > > We want to add (2) more 11Ghz links which we can mount at 65 feet facing > facing 345 degrees (and 55 feet facing 164 degrees) > > > > We would replace the SAF (move them elsewhere in the network) if necessary > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Adam Moffett > *Sent:* Tuesday, January 17, 2017 12:20 PM > *To:* [email protected] > > *Subject:* Re: [AFMUG] AF11x - frequency reuse ?? > > > > Yup. What Faisal said. > > > > Basically the two co-located units transmitting on the same channel > doesn't matter as long the two remote ends each hear only one of them. > Usually the beamwidth is so narrow that you have lots of re-use opportunity. > > > > > > ------ Original Message ------ > > From: "Faisal Imtiaz" <[email protected]> > > To: [email protected] > > Sent: 1/17/2017 12:12:13 PM > > Subject: Re: [AFMUG] AF11x - frequency reuse ?? > > > > ..... Since one channel (dedicated) is used for TX and another one > (dedicate) for RX ... with appropriate separation it is possible to make > things work... > > > > :) > > > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 <(305)%20663-5518> > > Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: > [email protected] > > > ------------------------------ > > *From: *"Gino Villarini" <[email protected]> > *To: *[email protected] > *Sent: *Tuesday, January 17, 2017 12:07:54 PM > *Subject: *Re: [AFMUG] AF11x - frequency reuse ?? > > Theres no need for gps sync reuse in fdx world … > > > > *From: *Af <[email protected]> on behalf of Paul McCall < > [email protected]> > *Reply-To: *"[email protected]" <[email protected]> > *Date: *Tuesday, January 17, 2017 at 1:02 PM > *To: *"[email protected]" <[email protected]> > *Subject: *Re: [AFMUG] AF11x - frequency reuse ?? > > > > OK. CAN they work with Re-Use like the 5x stuff does? (licensing aside) > > > > *From:* Af [mailto:[email protected] <[email protected]>] *On > Behalf Of *Mathew Howard > *Sent:* Tuesday, January 17, 2017 11:56 AM > *To:* af <[email protected]> > *Subject:* Re: [AFMUG] AF11x - frequency reuse ?? > > > > I don't see why not, as long as you can talk a frequency coordinator into > doing it. It's not like anyone else is going to object to it. > > > > > > > > *Gino Villarini* > > President > > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > On Tue, Jan 17, 2017 at 10:55 AM, That One Guy /sarcasm < > [email protected]> wrote: > > > > will they approve self interfering links? > > > > On Tue, Jan 17, 2017 at 10:51 AM, Mathew Howard <[email protected]> > wrote: > > Yeah... talk to a frequency coordinator. My understanding is, that if you > file an application that would only interfere with your own stuff, nobody > is going to care, and it'll go through fine... obviously you would have to > make sure you weren't really interfering with your other links. > > > > On Tue, Jan 17, 2017 at 10:42 AM, Faisal Imtiaz <[email protected]> > wrote: > > This question is best to be asked to your Freq. coordinator... > > > > Some of your assumptions are not quite the way things work.... :) > > > > Regards. > > > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 <(305)%20663-5518> > > Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: > [email protected] > > > ------------------------------ > > *From: *"Paul McCall" <[email protected]> > *To: *[email protected] > *Sent: *Tuesday, January 17, 2017 11:28:31 AM > *Subject: *[AFMUG] AF11x - frequency reuse ?? > > Just had a thought as we have a tower with 2 11ghz links on them ATM, and > I would love to add a 3rd and 4th. > > > > Wondering if the AF11x is designed for frequency reuse, and does the FCC > understand that so they wouldn’t kick back the application because of “lack > of available frequencies” ? > > > > Sorry if that has already been discussed. Been buried for a couple weeks > (in all ways here) and digging back out! > > > > Paul McCall, President > > PDMNet, Inc. / Florida Broadband, Inc. > > 658 Old Dixie Highway > > Vero Beach, FL 32962 > > 772-564-6800 <(772)%20564-6800> > > [email protected] > > www.pdmnet.com > > www.floridabroadband.com > > > > > > > > > > > > > > -- > > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. > > > > > >
