This is a 5MHz channel. Yes, significant noise at the AP. Should hopefully get better once we shut down the FSK. Hopefully we can move to 7MHz.

This customer's downlink power level is at -56dBm. 1.3 miles through nothing but trees the entire way. No leaves right now, so yeah, it's pretty hot. I expect we'll lose 10dB come spring.

Stats for LUID: 2 Test Duration: 2 Pkt Length: 1714 Test Direction Bi-Directional

*Link Test without Bridging*
VC      Downlink        Uplink  Aggregate       Packet Transmit         Packet 
Receive
Actual  Actual
18 22.45 Mbps 2.30 Mbps 24.76 Mbps, 1727 pps 3185 (1592 pps) 270(135 pps)



*Efficiency*
Downlink        Uplink
Efficiency      Fragments
count   Signal to
Noise Ratio     Efficiency      Fragments
count   Signal to
Noise Ratio
Actual  Expected        Actual  Expected
97%     90296   87723   36 dB B
38 dB A         94%     9564    9018    29 dB B
0 dB A

*
Link Quality
Downlink
*
RF Path         Modulation      Fragments       Modulation
Percentage      Average Corrected
Bit Errors
B       QPSK    10666   25%     1.868
B       16-QAM  10662   25%     1.951
B       64-QAM  10649   25%     2.527
B       256-QAM         10660   25%     1.839
A       QPSK    10882   25%     0.763
A       16-QAM  10853   25%     0.952
A       64-QAM  10839   25%     1.013
A       256-QAM         10865   25%     0.684

*Uplink
*
RF Path         Modulation      Fragments       Modulation
Percentage      Average Corrected
Bit Errors
B       QPSK    2432    33%     1.490
B       16-QAM  2429    33%     1.550
B       64-QAM  2429    33%     1.485


Link Test ran on 23:38:38 01/24/2017 UTC

*Currently transmitting at:*
VC 18 Rate 8X/8X MIMO-B



On 1/24/2017 2:54 PM, Kurt Fankhauser wrote:
Wow, I thought only secotors would work on the 450-900 due to the higher modulation requirements. What kinds of modulation rates are you seeing on the customer ends with the dual Omni's?

On Tue, Jan 24, 2017 at 3:43 PM, That One Guy /sarcasm <[email protected] <mailto:[email protected]>> wrote:

    youre not that far of a drive, do you have any of the crack
    cocaine left?

    On Tue, Jan 24, 2017 at 2:30 PM, George Skorup <[email protected]
    <mailto:[email protected]>> wrote:

        So we're converting a ~20 customer site from four sectors of
        FSK over to 450i. We put up Antel H-pol and L-com V-pol
        omni's. Slant at the SM works perfectly fine. I figured it
        would, just wanted to mention it.

        This is our first try at this and it seems to be a decent way
        to convert a smaller site.




-- If you only see yourself as part of the team but you don't see
    your team as part of yourself you have already failed as part of
    the team.



Reply via email to