It sounds like you are adding xmt and rcv throughput. That is not normally done with licensed links. If you say 750 Mbps, people will assume 750M xmt + 750M rcv simultaneously, or 1.5G aggregate.
From: Af [mailto:[email protected]] On Behalf Of Jeremy Sent: Wednesday, February 15, 2017 9:42 AM To: [email protected] Subject: Re: [AFMUG] 18GHz licensed At 1024QAM it does 761Mbps LG packets and 486Mbps SM packets. When I ran TCP speed tests on the link I got 750Mbps though. On Wed, Feb 15, 2017 at 8:40 AM, Jeremy <[email protected] <mailto:[email protected]> > wrote: No, it is 1024. On Wed, Feb 15, 2017 at 8:25 AM, Josh Luthman <[email protected] <mailto:[email protected]> > wrote: Is that 2048, Jeremy? Josh Luthman Office: 937-552-2340 <tel:(937)%20552-2340> Direct: 937-552-2343 <tel:(937)%20552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Feb 15, 2017 at 10:18 AM, Jeremy <[email protected] <mailto:[email protected]> > wrote: Our 6GHz Trango link does 750Mbps FDX on a 60MHz channel width. On Wed, Feb 15, 2017 at 7:55 AM, Rory Conaway <[email protected] <mailto:[email protected]> > wrote: No but it’s the middle of Phoenix, I’d be surprised if it was. Rory From: Af [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Jeff Broadwick - Lists Sent: Wednesday, February 15, 2017 5:06 AM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 18GHz licensed Did you check and see if there is a 60MHz channel available in 6GHz Rory? Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 <tel:(312)%20205-2519> Office 574-220-7826 <tel:(574)%20220-7826> Cell [email protected] <mailto:[email protected]> On Feb 15, 2017, at 1:39 AM, Rory Conaway <[email protected] <mailto:[email protected]> > wrote: Will the Cambium 820 support that? Rory -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of George Skorup Sent: Tuesday, February 14, 2017 11:25 PM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 18GHz licensed IIRC, there are 10 channel pairs on the 40MHz channel plan for 18GHz. You could always do 2+0 if there are two channels available on your proposed path. On 2/15/2017 12:06 AM, Rory Conaway wrote: 12 miles. Needs 4' dishes minimum but I didn't ask about both polarities. Thanks. Rory -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Trey Scarborough Sent: Tuesday, February 14, 2017 10:05 PM To: [email protected] <mailto:[email protected]> Subject: Re: [AFMUG] 18GHz licensed Hmm Xpic if you can get 40mhz on H and V. are you trying to make this go 30 miles though... On 2/14/2017 10:17 PM, Rory Conaway wrote: I have a link where only 40MHz is available. What would my best option be to get more than 500Mbps out of it? 2048QAM is limited to 347Mbps. *Rory Conaway **� Triad Wireless �**CEO* *4226 S. 37^th Street � Phoenix � AZ 85040* *602-426-0542 <tel:(602)%20426-0542> * *[email protected] <mailto:[email protected]> <mailto:[email protected]>* *www.triadwireless.net <http://www.triadwireless.net> <http://www.triadwireless.net/>* * * �The successful man is the one who finds out what is the matter with his business before his competitors do.� - Roy L. Smith
