I have used those super long flexible drill bits to place cables in impossible locations before.
From: Paul McCall Sent: Tuesday, March 28, 2017 1:00 PM To: [email protected] Subject: Re: [AFMUG] Wireless HDMI No chance we can pull it through. Long story on the construction that has taken place after this was put in, but yeah, no chance From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds Sent: Tuesday, March 28, 2017 2:27 PM To: [email protected] Subject: Re: [AFMUG] Wireless HDMI No ability to tape one end of the old cable to the new one and pull it through? On Mar 28, 2017 1:18 PM, "Paul McCall" <[email protected]> wrote: Anybody have a wireless HDMI transmitter receiver that they are in love with? We have a ceiling mount projector that we replaced recently with an Optomo. The old projector that got replaced worked with the HDMI that we ran 10 years ago when we built the room, but the new one won’t. I tried a couple of the “boosters” and they don’t work for me. We ran a long New cable with better specs and it works just fine. It’s a HUGE undertaking to remove the floor of the unit above us to get to a place where we could replace the existing one, so looking for wireless. It would be LOS to my desktop PC at about 20 feet away (at the most). Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 [email protected] www.pdmnet.com www.floridabroadband.com
