That’s not a proper operational control panel until you take all those pretty wire way covers and throw them in the bottom of the box.
I would seriously suggest getting a small enclosure to terminate the fiber cable into and then using a patch cable between the switch and the fiber patch. The first guy yanking wires in that panel is going to bust that fiber up. Mark > On Mar 29, 2017, at 5:11 PM, Jaime Solorza <[email protected]> wrote: > > So we got hired to install two Moxa switches and Prosoft Ethernet to DF1 with > power supplies to link an ABB Symphony system to a Siemans PLC system. An > electrical​ contractor ran conduit (about 800 ft) , fiber and termination. > We tested the fiber and made sure we could ping Prosoft from Siemans side. > All good. The fiber guys are bring something to protect these connections. > Not sure how it will work...The Moxas are installed where they told us to > put them...We brought enclosures but they wanted everything in their > cabinets. Let's see what happens tomorrow when all these engineers from > ABB, Siemans and Prosoft are in same place.... > <KIMG6327.JPG>
