Maybe McCown should build the better NID box. I don't know what the
criteria would be.
------ Original Message ------
From: "Adam Moffett" <[email protected]>
To: [email protected]
Sent: 4/6/2017 1:17:39 PM
Subject: Re: [AFMUG] ISO: fiber termination / coupler type box (not a
splice box_
http://www.fiberinstrumentsales.com/fis-nid-termination-box-lc-or-sc-accepts-8-fibers-for-dx-lc.html
This includes a splice tray, but has spaces to add mating sleeves also.
The LC to LC mating sleeve is a couple dollars extra.
The conduit knockouts are either 1/2" or 3/4"...I can't remember. I
did put one of these in with a flex conduit going into another
enclosure. If your pre-terminated cable has a simplex LC connector it
will fit through the flex conduit fittings just fine, if it's duplex
you have to force it through, or split the connector apart and put it
back together after it's through the conduit.
------ Original Message ------
From: "Paul McCall" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 4/6/2017 12:43:37 PM
Subject: [AFMUG] ISO: fiber termination / coupler type box (not a
splice box_
Small business MDU, running preterminated LC fiber into each unit in
conduit and flex conduit from wall to where I want to create a demark.
Looking for a simple box to plug in the LC fiber and bring out
another LC pigtail to go their nearby router.
Something like this… but no need for splice trays as everything is
pre-term.
http://www.balticnetworks.com/extralink-4-core-fiber-optic-distribution-box.html
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800
[email protected]
www.pdmnet.com
www.floridabroadband.com
