I will build anything if there is a buck to be found... From: Adam Moffett Sent: Thursday, April 06, 2017 11:18 AM To: [email protected] Subject: Re: [AFMUG] ISO: fiber termination / coupler type box (not a splicebox_
Maybe McCown should build the better NID box. I don't know what the criteria would be. ------ Original Message ------ From: "Adam Moffett" <[email protected]> To: [email protected] Sent: 4/6/2017 1:17:39 PM Subject: Re: [AFMUG] ISO: fiber termination / coupler type box (not a splice box_ http://www.fiberinstrumentsales.com/fis-nid-termination-box-lc-or-sc-accepts-8-fibers-for-dx-lc.html This includes a splice tray, but has spaces to add mating sleeves also. The LC to LC mating sleeve is a couple dollars extra. The conduit knockouts are either 1/2" or 3/4"...I can't remember. I did put one of these in with a flex conduit going into another enclosure. If your pre-terminated cable has a simplex LC connector it will fit through the flex conduit fittings just fine, if it's duplex you have to force it through, or split the connector apart and put it back together after it's through the conduit. ------ Original Message ------ From: "Paul McCall" <[email protected]> To: "[email protected]" <[email protected]> Sent: 4/6/2017 12:43:37 PM Subject: [AFMUG] ISO: fiber termination / coupler type box (not a splice box_ Small business MDU, running preterminated LC fiber into each unit in conduit and flex conduit from wall to where I want to create a demark. Looking for a simple box to plug in the LC fiber and bring out another LC pigtail to go their nearby router. Something like this… but no need for splice trays as everything is pre-term. http://www.balticnetworks.com/extralink-4-core-fiber-optic-distribution-box.html Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 [email protected] www.pdmnet.com www.floridabroadband.com
