Is that indoor only?
------ Original Message ------
From: "Carl Peterson" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 4/6/2017 1:52:52 PM
Subject: Re: [AFMUG] ISO: fiber termination / coupler type box (not a
splicebox_
I'm confused about how the conduit is running. Are you looking for
something that you can run the conduit into or just a fiber wall plate?
We use the attached. I order them 1K or so at a time from china.
Pretty cheap but importing can be a pain and lead time can be a month
or so. They fit on a standard low voltage cutout but don't have an
entry from the back. For 3mm cable, we route it through one of the
side holes. For pre-term, we drill them in the center of the cable
spool.
On Thu, Apr 6, 2017 at 1:22 PM, Chuck McCown <[email protected]> wrote:
I will build anything if there is a buck to be found...
From:Adam Moffett
Sent: Thursday, April 06, 2017 11:18 AM
To:[email protected]
Subject: Re: [AFMUG] ISO: fiber termination / coupler type box (not a
splicebox_
Maybe McCown should build the better NID box. I don't know what the
criteria would be.
------ Original Message ------
From: "Adam Moffett" <[email protected]>
To: [email protected]
Sent: 4/6/2017 1:17:39 PM
Subject: Re: [AFMUG] ISO: fiber termination / coupler type box (not a
splice box_
http://www.fiberinstrumentsales.com/fis-nid-termination-box-lc-or-sc-accepts-8-fibers-for-dx-lc.html
<http://www.fiberinstrumentsales.com/fis-nid-termination-box-lc-or-sc-accepts-8-fibers-for-dx-lc.html>
This includes a splice tray, but has spaces to add mating sleeves
also. The LC to LC mating sleeve is a couple dollars extra.
The conduit knockouts are either 1/2" or 3/4"...I can't remember. I
did put one of these in with a flex conduit going into another
enclosure. If your pre-terminated cable has a simplex LC connector
it will fit through the flex conduit fittings just fine, if it's
duplex you have to force it through, or split the connector apart and
put it back together after it's through the conduit.
------ Original Message ------
From: "Paul McCall" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 4/6/2017 12:43:37 PM
Subject: [AFMUG] ISO: fiber termination / coupler type box (not a
splice box_
Small business MDU, running preterminated LC fiber into each unit in
conduit and flex conduit from wall to where I want to create a
demark. Looking for a simple box to plug in the LC fiber and bring
out another LC pigtail to go their nearby router.
Something like this… but no need for splice trays as everything is
pre-term.
http://www.balticnetworks.com/extralink-4-core-fiber-optic-distribution-box.html
<http://www.balticnetworks.com/extralink-4-core-fiber-optic-distribution-box.html>
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 <tel:(772)%20564-6800>
[email protected]
www.pdmnet.com
www.floridabroadband.com
--
Carl Peterson
PORT NETWORKS
401 E Pratt St, Ste 2553
Baltimore, MD 21202
(410) 637-3707
