No, what would it be if you had continuous railcar transport???  We could 
eliminate all the fiber with railroads!

From: Forrest Christian (List Account) 
Sent: Monday, April 17, 2017 10:15 AM
To: af 
Subject: Re: [AFMUG] bulk data transfer

Chicago to LA is 30 hours by truck. 

Typical 53 foot trailer is 3816 cubic feet.

A LTO-7 tape can hold 6TB
The volume of a LTO-7 tape is just under 0.01 cubic foot (0.00839973....)  
We'll use 0.01 cubic foot.

A 53 foot trailer packed completely full can hold 381600 Tapes X 6TB = 
2,289,600TB, or 2289 PB.

2,289,600TB/30hours = 76320TB/hr.
or
1272TB/min
or
21.2TB/sec.
or
169.6Tbit/second.






On Mon, Apr 17, 2017 at 9:39 AM, Robert Andrews <[email protected]> wrote:

  I can't remember which but there was a nanog presentation a few years ago 
about max bandwidth and the top of the chart was still listed as a 747 cargo 
full of optical media..   Now as far as getting that data on and off the 
media....

  On 04/17/2017 07:36 AM, Forrest Christian (List Account) wrote:

    For the seed you need to understand this quote:

    "/Never underestimate the bandwidth of a station wagon full of tapes
    hurtling down the highway/." —Tanenbaum, Andrew S. (1989). Computer
    Networks. New Jersey: Prentice-Hall. p. 57. ISBN 0-13-166836-6.

    I'd highly recommend you think about how to move that seed via Fedex or
    UPS.    You're already going to be storing the data somewhere, if
    possible, take whatever it is your storing it on (or backing it up on)
    to the origin location and copy it to it.... *then* ship it to and
    install it in your datacenter.   It is likely that the cost of doing
    this will actually be less than the cost of buying a circuit which will
    do this in a reasonable amount of time, especially if you are buying a
    piece of hardware to store this data (likely).

    For the updates,  4pb per year is just over 1Mb/s if I did the math
    correctly....   This is in the realm of normal internet, assuming the
    data grows gradually throughout a year.

    I'll let others point you toward a 10Gig wave if you'd rather not use
    the "move media" approach.


    On Mon, Apr 17, 2017 at 8:04 AM, Zach Underwood <[email protected]
    <mailto:[email protected]>> wrote:

        I work for a medical data company and we have a possible project
        where will be getting data from a human genome company. What would
        be a option for move the data between our datacenter and there
        datacenter? We are in the southeast and they are in the midwest. The
        data amount would be a seed of 5pb and growth of 4pb per year. The
        networking on our side would be 100gbit LAN.

        --
        Zach Underwood (RHCE,RHCSA,RHCT,UACA)
        My website <http://zachunderwood.me>
        advance-networking.com <http://advance-networking.com>




    --
    *Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
    Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
    [email protected]
    <mailto:[email protected]> | http://www.packetflux.com
    <http://www.packetflux.com/>
    <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> 
<http://twitter.com/@packetflux>







-- 

      Forrest Christian CEO, PacketFlux Technologies, Inc.

      Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
      [email protected] | http://www.packetflux.com

         


Reply via email to