careful. UP is listening.

On Mon, Apr 17, 2017 at 11:22 AM Chuck McCown <[email protected]> wrote:

> No, what would it be if you had continuous railcar transport???  We could
> eliminate all the fiber with railroads!
>
> *From:* Forrest Christian (List Account)
> *Sent:* Monday, April 17, 2017 10:15 AM
> *To:* af
> *Subject:* Re: [AFMUG] bulk data transfer
> Chicago to LA is 30 hours by truck.
>
> Typical 53 foot trailer is 3816 cubic feet.
>
> A LTO-7 tape can hold 6TB
> The volume of a LTO-7 tape is just under 0.01 cubic foot (0.00839973....)
> We'll use 0.01 cubic foot.
>
> A 53 foot trailer packed completely full can hold 381600 Tapes X 6TB =
> 2,289,600TB, or 2289 PB.
>
> 2,289,600TB/30hours = 76320TB/hr.
> or
> 1272TB/min
> or
> 21.2TB/sec.
> or
> 169.6Tbit/second.
>
>
>
>
>
>
> On Mon, Apr 17, 2017 at 9:39 AM, Robert Andrews <[email protected]>
> wrote:
>
>> I can't remember which but there was a nanog presentation a few years ago
>> about max bandwidth and the top of the chart was still listed as a 747
>> cargo full of optical media..   Now as far as getting that data on and off
>> the media....
>>
>> On 04/17/2017 07:36 AM, Forrest Christian (List Account) wrote:
>>
>>> For the seed you need to understand this quote:
>>>
>>> "/Never underestimate the bandwidth of a station wagon full of tapes
>>> hurtling down the highway/." —Tanenbaum, Andrew S. (1989). Computer
>>> Networks. New Jersey: Prentice-Hall. p. 57. ISBN 0-13-166836-6.
>>>
>>> I'd highly recommend you think about how to move that seed via Fedex or
>>> UPS.    You're already going to be storing the data somewhere, if
>>> possible, take whatever it is your storing it on (or backing it up on)
>>> to the origin location and copy it to it.... *then* ship it to and
>>> install it in your datacenter.   It is likely that the cost of doing
>>> this will actually be less than the cost of buying a circuit which will
>>> do this in a reasonable amount of time, especially if you are buying a
>>> piece of hardware to store this data (likely).
>>>
>>> For the updates,  4pb per year is just over 1Mb/s if I did the math
>>> correctly....   This is in the realm of normal internet, assuming the
>>> data grows gradually throughout a year.
>>>
>>> I'll let others point you toward a 10Gig wave if you'd rather not use
>>> the "move media" approach.
>>>
>>>
>>> On Mon, Apr 17, 2017 at 8:04 AM, Zach Underwood <[email protected]
>>> <mailto:[email protected]>> wrote:
>>>
>>>     I work for a medical data company and we have a possible project
>>>     where will be getting data from a human genome company. What would
>>>     be a option for move the data between our datacenter and there
>>>     datacenter? We are in the southeast and they are in the midwest. The
>>>     data amount would be a seed of 5pb and growth of 4pb per year. The
>>>     networking on our side would be 100gbit LAN.
>>>
>>>     --
>>>     Zach Underwood (RHCE,RHCSA,RHCT,UACA)
>>>     My website <http://zachunderwood.me>
>>>     advance-networking.com <http://advance-networking.com>
>>>
>>>
>>>
>>>
>>> --
>>> *Forrest Christian* /CEO//, PacketFlux Technologies, Inc./
>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
>>> [email protected]
>>> <mailto:[email protected]> | http://www.packetflux.com
>>> <http://www.packetflux.com/>
>>> <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux>
>>> <http://twitter.com/@packetflux>
>>>
>>>
>>>
>
>
> --
> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
> [email protected] | http://www.packetflux.com
> <http://www.linkedin.com/in/fwchristian>  <http://facebook.com/packetflux>
>   <http://twitter.com/@packetflux>
>
>

Reply via email to