Throwing those pictures on your website alone would be great Jon Langeler Michwave Technologies, Inc.
> On Apr 18, 2017, at 3:21 PM, Forrest Christian (List Account) > <[email protected]> wrote: > > Partially our fault... We really should have better docs available. There's > a lot of reasons why we don't, but suffice it to say that it is not because > of lack of desire. > >> On Apr 18, 2017 9:08 AM, "Sam Lambie" <[email protected]> wrote: >> Thanks for the heads up on the pin out. I feel pretty dumb now.... >> >>> On Mon, Apr 17, 2017 at 10:22 AM, Forrest Christian (List Account) >>> <[email protected]> wrote: >>> There's a drawing in the 450i or 450m documentation which shows how to >>> cable a 6p6c device to the 8p8c port. Snip shown below: >>> >>> <ugpscable.PNG> >>> >>> >>>> On Mon, Apr 17, 2017 at 9:06 AM, Sam Lambie <[email protected]> wrote: >>>> Ok Thanks. The Syncbox is new as of a month ago. >>>> Cabling from to Medusa is RJ-12 using pins 1 and 6 for sync. I have a >>>> feeling that I need to use a different termination.... >>>> What is the proper termination type and cabling pinout? Your site is >>>> lacking on documentation. >>>> >>>> Thanks >>>> Sam >>>> >>>>> On Mon, Apr 17, 2017 at 8:59 AM, Forrest Christian (List Account) >>>>> <[email protected]> wrote: >>>>> This is definitely in the weird category. >>>>> >>>>> Can you verify how old this syncbox 12 is? I'm guessing that it is new >>>>> from us in February. >>>>> >>>>> Can you also let me know how you cabled the syncbox to the medusa? >>>>> >>>>> The two weird items here are: >>>>> >>>>> 1) Why is it not picking up sync from the timing port? (Cabling issue? >>>>> There's a special cable from the syncbox to the aux port since the aux >>>>> port is a 8p8c with a different pinout) >>>>> >>>>> 2) Why does it think it's picking up sync from the power port? >>>>> >>>>> >>>>> >>>>>> On Mon, Apr 17, 2017 at 8:45 AM, Sam Lambie <[email protected]> wrote: >>>>>> Well, That didn't work... I turned off Sync to the radio via the Site >>>>>> Monitor on Friday and the Radio still flopped all weekend. It still >>>>>> thinks it is getting sync from the power port and never has indicated >>>>>> that it is getting sync from the timing port. Are there any settings on >>>>>> the radio that I am missing? >>>>>> <image.png> >>>>>> <image.png> >>>>>> >>>>>>> On Fri, Apr 14, 2017 at 5:53 PM, Forrest Christian (List Account) >>>>>>> <[email protected]> wrote: >>>>>>> Yes, that was correct, and yes, as long as it's a recent syncbox it >>>>>>> should work fine. >>>>>>> >>>>>>> -forrest >>>>>>> >>>>>>>> On Fri, Apr 14, 2017 at 3:22 PM, Sam Lambie <[email protected]> >>>>>>>> wrote: >>>>>>>> I just did that and will monitor it over the weekend. Thanks for the >>>>>>>> tip. Lastly, The Sync coming out of the Sync Box into the timing port >>>>>>>> of the Medusa should work right? >>>>>>>> >>>>>>>>> On Fri, Apr 14, 2017 at 3:20 PM, Sam Lambie <[email protected]> >>>>>>>>> wrote: >>>>>>>>> Changing the value function on the Radio 4 Sync from 1 to 0 will do >>>>>>>>> the trick? >>>>>>>>> >>>>>>>>>> On Fri, Apr 14, 2017 at 3:08 PM, Forrest Christian (List Account) >>>>>>>>>> <[email protected]> wrote: >>>>>>>>>> This error means you have sync over power pulses coming in from the >>>>>>>>>> syncinjector. >>>>>>>>>> >>>>>>>>>> The radio is seeing the old-style pulses and is trying to lock onto >>>>>>>>>> them, which won't work reliably - since the pulses aren't even close >>>>>>>>>> to what it's expecting. >>>>>>>>>> >>>>>>>>>> You need to disable the pulses in the injector in some way. If >>>>>>>>>> you've got a SiteMonitor base unit attached, just turn off sync on >>>>>>>>>> those ports. If you don't, then just use a cambium power supply >>>>>>>>>> and skip the injector, or if you don't have any radios which need >>>>>>>>>> the sync over power pulse attached to the injector, make a cable >>>>>>>>>> shorting pins 1 and 2 of a RJ45 jack and plug that into the sync >>>>>>>>>> input port on the syncinjector. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> On Thu, Apr 13, 2017 at 9:28 AM, Sam Lambie <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Medusa doesn't seem to like the packetflux gps. I am getting this >>>>>>>>>>> most of the time. >>>>>>>>>>> 04/13/2017 : 09:12:44 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:12:45 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:12:45 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:00 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:03 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:03 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:03 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:05 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:05 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:05 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:07 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:07 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:07 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:09 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:09 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:09 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:12 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:12 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:12 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:14 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:14 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:14 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:16 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:16 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:21 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:23 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:23 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:23 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:25 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:25 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:27 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:30 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:30 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:30 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:32 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:32 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:32 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:33 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:33 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:37 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:39 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:39 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:48 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:51 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:51 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:53 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:55 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:55 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:55 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:57 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:13:57 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:13:57 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:00 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:00 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:00 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:02 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:02 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:02 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:03 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:03 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:07 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:10 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:10 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:10 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:12 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:12 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:12 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:14 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:14 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:14 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:15 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:15 MDT : Generating Sync - Free Run >>>>>>>>>>> 04/13/2017 : 09:14:20 MDT : Acquired sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:22 MDT : Lost sync pulse from Power Port >>>>>>>>>>> 04/13/2017 : 09:14:22 MDT : Generating Sync - Free Run >>>>>>>>>>> tried replacing the timing cable and making adjustments to no >>>>>>>>>>> avail. It comes and goes. Going up there to plug in the old 450 ap >>>>>>>>>>> to it and see if that AP sees the same issue.Sean Heskitt, have you >>>>>>>>>>> seen any issues with this setup? >>>>>>>>>>> >>>>>>>>>>>> On Wed, Apr 12, 2017 at 9:06 PM, Jaime Solorza >>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Awesome....Great view....Wife and I will be headed out to Taos >>>>>>>>>>>> soon... >>>>>>>>>>>> >>>>>>>>>>>>> On Apr 12, 2017 8:48 PM, "Sam Lambie" <[email protected]> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> Cambium Medusa. Synced with Packetflux Syncbox 12. Powered with >>>>>>>>>>>>> Syncinjectors by Packetflux. >>>>>>>>>>>>> >>>>>>>>>>>>> Just put it up today so no performance reviews yet. 101 customers >>>>>>>>>>>>> coming from a 450 AP. >>>>>>>>>>>>> >>>>>>>>>>>>> Psyched >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> -- >>>>>>>>>>> Sam Lambie >>>>>>>>>>> Taosnet Wireless Tech. >>>>>>>>>>> 575-758-7598 Office >>>>>>>>>>> www.Taosnet.com >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Forrest Christian CEO, PacketFlux Technologies, Inc. >>>>>>>>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>>>>>>>>> [email protected] | http://www.packetflux.com >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> -- >>>>>>>>> Sam Lambie >>>>>>>>> Taosnet Wireless Tech. >>>>>>>>> 575-758-7598 Office >>>>>>>>> www.Taosnet.com >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> -- >>>>>>>> Sam Lambie >>>>>>>> Taosnet Wireless Tech. >>>>>>>> 575-758-7598 Office >>>>>>>> www.Taosnet.com >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Forrest Christian CEO, PacketFlux Technologies, Inc. >>>>>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>>>>>> [email protected] | http://www.packetflux.com >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> -- >>>>>> Sam Lambie >>>>>> Taosnet Wireless Tech. >>>>>> 575-758-7598 Office >>>>>> www.Taosnet.com >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Forrest Christian CEO, PacketFlux Technologies, Inc. >>>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>>>> [email protected] | http://www.packetflux.com >>>>> >>>>> >>>> >>>> >>>> >>>> >>>> -- >>>> -- >>>> Sam Lambie >>>> Taosnet Wireless Tech. >>>> 575-758-7598 Office >>>> www.Taosnet.com >>> >>> >>> >>> >>> -- >>> Forrest Christian CEO, PacketFlux Technologies, Inc. >>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>> [email protected] | http://www.packetflux.com >>> >>> >> >> >> >> -- >> -- >> Sam Lambie >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com
