kiss kiss! You da man Seth. thank you very much. On Wed, Apr 19, 2017 at 10:07 AM, Seth Mattinen <[email protected]> wrote:
> On 4/19/17 07:59, Sam Lambie wrote: > >> That seemed to work, but the odd thing is that it took the Medusa 11 >> hours to switch over to using the Timing port. Even though I made doubly >> sure that I had sync turned off on the power port of the Sync Injector, >> it still indicated that it had sync. Then at 0004 it switched. The radio >> did show that timing was available on the UGPS port right away as well >> as on the power port. Now the radio intermittently show sync-no sync on >> the power power port. is there a way to force the radio to only listen >> on the timing port so it doesn't get confused? >> > > > There is, in the command line. Telnet to it and you should have: > > synconboard -- Enable/Disable On-board GSP Sync > synctimingport -- Enable/Disable GSP Sync over Timing Port > syncpowerport -- Enable/Disable GSP Sync over Power Port > > Then you can do "syncpowerport off". > > ~Seth > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
