If the first 3 in the chain are provided 52 volts and the next 3 are powered by 26 volts and they are all chained too the same basic sync pipe that is not an issue? These will be mostly powering PxP450i gear so I guess we will see how it goes.
On Thu, May 4, 2017 at 6:49 PM, Forrest Christian (List Account) < [email protected]> wrote: > There is one caveat: > > The pre-revision I hardware is likely to cause a bit of ringing on the > sync pulse. The 450i does not like this. Depending on the cable length, > how they are installed, etc, etc, etc, the 450i may never accept the pulse > as valid due to this ringing. > > This is the change which the I injectors fixed. > > Daisy chaning revisions are not a problem, as long as they are all > revision H or later. > > On Thu, May 4, 2017 at 10:28 AM, Matt <[email protected]> wrote: > >> Will a PacketFlux SyncInjector 100 hardware H1 accept 48+ volts and >> power up and provide sync to a PMP450i AP with 100mbps ethernet? >> > > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
