And you are using a SyncBox connected to the timing port of the 320 for sync?
On Thu, May 25, 2017 at 2:18 PM, Paul McCall <[email protected]> wrote: > Very creatively. We took apart a Motorola POE (old style) and rewired it > +,- +,- .. We power off ports 1,2,3 or 4, and data in a different port. > Uses 2 ports instead of 1 but does the job > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Eric Rogers > *Sent:* Thursday, May 25, 2017 11:40 AM > > *To:* [email protected] > *Subject:* Re: [AFMUG] Hybrid Control tower top > > > > How are you powering a 320 on the S16? > > > > Eric Rogers > > [image: PDSConnect_logo-Connecting You to the World - Signature Logo] > > www.pdsconnect.me > > (317) 831-3000 x200 <(317)%20831-3000> > > > > *From:* Af [mailto:[email protected] <[email protected]>] *On > Behalf Of *Paul McCall > *Sent:* May 25, 2017 11:24 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] Hybrid Control tower top > > > > We are using S16s which work well. Not using them with Medusa stuff > though. > > > > Using 450s, ePMP, Canopy, 320s, UBNT, Mikrotik etc successfully > > > > *From:* Af [mailto:[email protected] <[email protected]>] *On > Behalf Of *Dave > *Sent:* Thursday, May 25, 2017 9:43 AM > *To:* Animal Farm <[email protected]> > *Subject:* [AFMUG] Hybrid Control tower top > > > > I am looking or want to know what everyone else is doing for a tower type > controller similar to CMM4 with a planet switch? > I am sure that I may have missed the thread on this but wanted to see what > everyone was doing for this. > > The Cmm4 with planet switch and a good sfp fiber module has been bullet > proof for us on a few sites and I have a few more new ones that may > require this and I want to move more to gige solution that will support > Medusa,pmp450i systems. These boxes are usually mounted below the first set > of sectors around 300' or so. > I am looking a putting one together using some of forests' products just > for simplicity of Din Rail snap in tech. I can get a nice ip66 enclosure > like the cmm4 > to mount everything in but before I dive into this I want to see what you > guys are doing. > > If Cambium is listening I hope they are taking notes : ) > If they are.. What I would like is Din Rail modules in the tower top box > because the poor tower climber doesnt handle small parts very well in high > winds. > > Thanks > Dave > > > -- >
