I haven't even seen a PowerBox Pro yet, but I'm assuming it's the same guts as a hEX PoE/RB960PGS, which I do have in my hand at the moment... I can tell you that they'll power an AF-5X or ePMP AP without any issues, but I don't know about anything beyond that. If the S16 isn't putting out enough power, I doubt these will.
On Fri, May 26, 2017 at 2:46 PM, Paul McCall <[email protected]> wrote: > Has anybody used these to provide power to anything significant? > > > > I have (2) towers with 400+ runs of 12awg from bottom to top with a 10AMP > 56v/48v power supply going to a fully loaded S16 including (2) Cambium 320s > (using power adapter) . We are getting 48v actual at the top, BUT > plugging the 2nd 320 into the S16 in at the top causes everything to > reboot. Changed 320s, definitely not a specific radio issue. > > > > Soooo… I have plenty of fiber ports at the top so though I might be able > to use a separate 48 power supply at the bottom (have another pair of 12awg > to use also) and be able to power up one of both of the 320s off that. > > > > Can’t tell by the specs if the PowerBox Pro will output enough power??? > > > > Paul > > > > Paul McCall, President > > PDMNet, Inc. / Florida Broadband, Inc. > > 658 Old Dixie Highway > > Vero Beach, FL 32962 > > 772-564-6800 <(772)%20564-6800> > > [email protected] > > www.pdmnet.com > > www.floridabroadband.com > > > > >
