Looking for a solution that doesn’t require an external box, etc. A 2nd S16 is the same price (without a box) as Netonix I think. Chris’s description of port sensitivity issues on Netonix also scare us off
From: Af [mailto:[email protected]] On Behalf Of Josh Baird Sent: Friday, May 26, 2017 4:00 PM To: [email protected] Subject: Re: [AFMUG] PowerBox Pro Power with DC and have SFP interfaces? Netonix. On Fri, May 26, 2017 at 3:58 PM, Paul McCall <[email protected]<mailto:[email protected]>> wrote: That being said, is there anything similar to power with fiber at 48v, short of a 2nd S16? From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Paul McCall Sent: Friday, May 26, 2017 3:46 PM To: [email protected]<mailto:[email protected]> Subject: [AFMUG] PowerBox Pro Has anybody used these to provide power to anything significant? I have (2) towers with 400+ runs of 12awg from bottom to top with a 10AMP 56v/48v power supply going to a fully loaded S16 including (2) Cambium 320s (using power adapter) . We are getting 48v actual at the top, BUT plugging the 2nd 320 into the S16 in at the top causes everything to reboot. Changed 320s, definitely not a specific radio issue. Soooo… I have plenty of fiber ports at the top so though I might be able to use a separate 48 power supply at the bottom (have another pair of 12awg to use also) and be able to power up one of both of the 320s off that. Can’t tell by the specs if the PowerBox Pro will output enough power??? Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800<tel:(772)%20564-6800> [email protected]<mailto:[email protected]> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
