We did the same with a Netonix. Pretty sure the port is shot. Might be OK after a reboot of the switch but never tested very heavily since we didn't need the port.
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Af <[email protected]> on behalf of Christopher Gray <[email protected]> Sent: Friday, June 23, 2017 12:07:53 PM To: [email protected] Subject: [AFMUG] Mistake: Crimping With PoE Connected? So, I made a mistake and crimped a cable end while the PoE was still connected to the other end (Cambium ePMP gigabit PoE). I saw a small spark while the crimper hit the contacts. I expected to have to re-do the end and possibly replace the PoE, but everything was fine. Are some injectors just less sensitive than others? I hear a Netonix will lose a port if you do that. Are there any crimpers with non-conductive dies? -Chris
