Our Cat5 is all tower top. Fiber to the EP-S16 then short runs to the APs (always less than 15 feet). Since the APs are grounded to a bus bar (currently attached to the tower – not isolated). We ground the shield and drain wire at the AP end
From: Af [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Monday, July 24, 2017 2:53 PM To: [email protected] Subject: Re: [AFMUG] Tower Grounding - carrier 1 pictures Are you stripping the cat5 jacket and grounding the shielding like them? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Jul 24, 2017 at 2:30 PM, Paul McCall <[email protected]<mailto:[email protected]>> wrote: Note that this first carrier is directly tied at the bottom of the tower (and isolated from the tower at the top) Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800<tel:(772)%20564-6800> [email protected]<mailto:[email protected]> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
