How are the APs grounded? Just like in the pictures, between the cat5 and ground bar?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Jul 24, 2017 at 2:57 PM, Paul McCall <[email protected]> wrote: > Our Cat5 is all tower top. Fiber to the EP-S16 then short runs to the APs > (always less than 15 feet). Since the APs are grounded to a bus bar > (currently attached to the tower – not isolated). We ground the shield and > drain wire at the AP end > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman > *Sent:* Monday, July 24, 2017 2:53 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Tower Grounding - carrier 1 pictures > > > > Are you stripping the cat5 jacket and grounding the shielding like them? > > > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Mon, Jul 24, 2017 at 2:30 PM, Paul McCall <[email protected]> wrote: > > Note that this first carrier is directly tied at the bottom of the tower > (and isolated from the tower at the top) > > > > > > > > Paul McCall, President > > PDMNet, Inc. / Florida Broadband, Inc. > > 658 Old Dixie Highway > > Vero Beach, FL 32962 > > 772-564-6800 <(772)%20564-6800> > > [email protected] > > www.pdmnet.com > > www.floridabroadband.com > > > > > > >
