High sensitivity often works with generators in my experience as long as they're the inverter type.
On Fri, Jul 28, 2017 at 8:29 AM, Eric Muehleisen <[email protected]> wrote: > This is great info. We too have experienced this same issue with AF24's. > Like Gino, we always set it to Low Sensitivity. This setting allows us to > easily run the site off portable generator in a pinch. High Sensitivity > won't allow for a portable genset. > > On Fri, Jul 28, 2017 at 4:24 AM, Gino A. Villarini <[email protected]> > wrote: > >> Wow, might try this… we usually put them on low sensitivity for a more >> robust experience. Didn’t know this affected the switching time! >> >> Thanks Collin!!! >> >> From: Af <[email protected]> on behalf of Colin Stanners < >> [email protected]> >> Reply-To: "[email protected]" <[email protected]> >> Date: Thursday, July 27, 2017 at 9:51 PM >> To: "[email protected]" <[email protected]> >> Subject: Re: [AFMUG] Is there such a thing as a AC Capacitor? >> >> Gino, can you say which gear? Most UPSes switch pretty much "instantly" >> (less than one AC cycle, which lasts 16ms) so a PSU that wouldn't last one >> AC cycle must have very questionable engineering. Or assuming that you use >> APC UPSes, you can change the sensitivity setting to switch quicker: >> http://www.apc.com/us/en/faqs/FA156514/ >> >> >> >> *Gino A. Villarini* >> President >> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 >> >> On Thu, Jul 27, 2017 at 2:57 PM, Gino A. Villarini <[email protected]> >> wrote: >> >>> Got some gear that hangs when UPS switches from AC power to Batts… >>> needs something to power AC for microseconds >>> >>> >>> >>> *Gino A. Villarini* >>> President >>> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 >>> >>> >> >
