There are a few providers doing above 1G service. The only cpe I remember
any of them using was a Juniper ACX2200

On Aug 5, 2017 8:39 AM, "Paul McCall" <pa...@pdmnet.net> wrote:

> Yes, at least a couple ports.   I suppose I am looking at a CCR that has
> enough SFP+ ports to support 2 or 3 PCs at 10Gbit connection.
>
>
>
> This is all a bit down the road (90 days) so perhaps there will be a lower
> cost multi SFP+ port CCR out by then.  Right now, the CCR1009 at sub $ 400
> would have one IN and one OUT.
>
>
>
> I may be thinking a little ahead of my time 😊
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Gino A. Villarini
> *Sent:* Saturday, August 5, 2017 9:29 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Any SOHO router (cost effective) that does SFP+?
>
>
>
> Ohh I missed the SFP+ … hmm not many options partner
>
>
>
> Does it has to have 10G electrical too?
>
>
>
> *From: *Af <af-boun...@afmug.com> on behalf of Paul McCall <
> pa...@pdmnet.net>
> *Reply-To: *"af@afmug.com" <af@afmug.com>
> *Date: *Saturday, August 5, 2017 at 9:15 AM
> *To: *"af@afmug.com" <af@afmug.com>
> *Subject: *Re: [AFMUG] Any SOHO router (cost effective) that does SFP+?
>
>
>
> 3 GBs
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On
> Behalf Of *Gino A. Villarini
> *Sent:* Friday, August 4, 2017 12:34 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Any SOHO router (cost effective) that does SFP+?
>
>
>
> What kinds of speeds you want to support?
>
>
>
> *From: *Af <af-boun...@afmug.com> on behalf of Paul McCall <
> pa...@pdmnet.net>
> *Reply-To: *"af@afmug.com" <af@afmug.com>
> *Date: *Friday, August 4, 2017 at 12:24 PM
> *To: *"af@afmug.com" <af@afmug.com>
> *Subject: *[AFMUG] Any SOHO router (cost effective) that does SFP+?
>
>
>
> Any SOHO router (cost effective) that does SFP+?
>
>
>
> Was considering negotiating to buy a bunch of SFP+ BiDi for a large
> implementation if I can get them around $ 60 a set (vs. $ 20 per set for
> 1GB SFP).  Then my cranial vault spewed forth a reminder that stanard CPE
> type routers don’t support that.  So, the question is, are there a few that
> I am not thinking of?
>
>
>
> Paul
>
>
>
> Paul McCall, President
>
> PDMNet, Inc. / Florida Broadband, Inc.
>
> 658 Old Dixie Highway
>
> Vero Beach, FL 32962
>
> 772-564-6800 <(772)%20564-6800>
>
> pa...@pdmnet.net
>
> www.pdmnet.com
>
> www.floridabroadband.com
>
>
>
>
>
>
>
> *Gino A. Villarini*
>
> President
>
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
>
>
>
> *Gino A. Villarini*
>
> President
>
> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
>
>

Reply via email to