I saw that ... But it has the option in the user interface to enable it, and at least one customer who claims it works with a ugps but not with my device.
There is also a spec sheet floating around which claims that it had a rj45 aux port. But that one looks like it's a half updated 450i ptp datasheet. On Aug 11, 2017 3:23 PM, "George Skorup" <[email protected]> wrote: > The PTP450 spec sheet states: > > GPS SYNCHRONIZATION YES, VIA EXTERNAL UGPS AND SEPARATE POWER SUPPLY > > So.... no UGPS power on the timing port? > > On 8/11/2017 12:50 PM, Forrest Christian (List Account) wrote: > > I have some customers who are having problems powering one of my Syncbox > receivers from a PTP450 radio (uGPS power difference perhaps). This is > the radio which is derived from a 450SM and doesn't have the sync over > power option, only sync over the timing port. Not sure if there's > something else different. > > So... I need to get one here for testing, don't particularly need to buy > a new one. I don't even care if the RF section works or not - just need > the radio to power on and for the sync port to work correctly.... > > I don't seem to be able to find one of these in the normal used equipment > locations that I check (ebay, SWG, PDM, etc). > > Anyone have an idea where I can get one of these? I notice new isn't that > expensive so I guess it's not the end of the world if I don't find one. > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > > >
