Yeah that's what I was going to say. That's the SNMP bug in 3.2.1 and
only the cnMaestro agent can reboot them when they go stupid. I've also
had radios on 3.2.2 fail to update due to out of memory errors. What
I've been doing is rebooting all SMs on a sector, then reboot the AP,
then upgrade the entire sector in cnMaestro. Seems to work fine.
On 8/31/2017 1:21 PM, Josh Luthman wrote:
When you get stuck in that damn SNMP bug you have to reboot it from
cnMaestro. Reboot from the Cambium SSH prompt or GUI does not work.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Aug 31, 2017 at 12:29 PM, Steve Jones
<[email protected] <mailto:[email protected]>> wrote:
I got it figured out, turns out uptime wasnt resetting when i
rebooted from the web interface, so i ssh in, reboot got an Error
in packet response. So the unit was never rebooting. Rebooted from
cnmaestro and it actually rebooted.
let me load the firmware
On Thu, Aug 31, 2017 at 11:22 AM, [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> wrote:
Make sure to reboot it before upgrading it too.
On Thu, Aug 31, 2017 at 12:20 PM, [email protected]
<mailto:[email protected]> <[email protected]
<mailto:[email protected]>> wrote:
Have you tried updating it from the web interface?
On Thu, Aug 31, 2017 at 12:02 PM, Steve Jones
<[email protected]
<mailto:[email protected]>> wrote:
Anybody come across this, we have a 3.2.1 that wont
update, Cnmaestro either skips it saying update in
progress or unit offline
loading from the gui fails everytime with "SW Update
is running!"
Its like it must have tried an update at one point but
never succeeded and it thinks its mid update
this is a deployed unit so i cant default it just yet.
Ive only gui cycled it, not power cycled so that may
resolve it.
any input?
