450M on junior looks good running 15.1.1 Checked a 450i on junior running 14.2.1 and it has GPS data as well.
On Thu, Aug 31, 2017 at 4:58 AM, George Skorup <[email protected]> wrote: > Yup, just tried one. 100% confirmed w/ a Rev i SB12. Turned on UGPS power > on one of the 450i APs and now it sees the data. I don't remember if I > wired the RJ12 with 1,2,3&6 or just 1,3&6 on that one. Knowing me, since I > knew the SB12 can't take UGPS power anyway, I probably left pin 2 > disconnected. > > On 8/31/2017 3:42 AM, Forrest Christian (List Account) wrote: > > If you get a chance, try turning the uGPS power on on one of the non-uGPS > powered ones... Should be perfectly safe, since there isn't anything > attached to that pin on the syncbox 12's. > > I'm glad to hear that data is working. I've been so saturated with this > rackinjector project that I haven't had a chance to keep up with the > releases and test them. I knew cambium was working on them, but when I > keep hearing the data isn't there I just assume they haven't fixed it. > Now I have an answer for my tech support customers. > > > > On Thu, Aug 31, 2017 at 2:32 AM, George Skorup <[email protected]> > wrote: > >> Cool to hear GPS+GLONASS coming. >> >> 15.0.3 or 15.1 fixed the 450i GPS data. I forget which one. I'm now >> running 15.1.1 on all 900 450i sectors. And I have some that don't display >> the data. I had a suspicion that it had something to do with UGPS power >> since the ones that don't work are on boxes with dedicated power and UGPS >> power on those APs is off. I messed with the message checksum and it didn't >> make a difference. >> >> All sectors with SBJ Aux boxes w/ UGPS power on = GPS data present. >> >> 900 450i sectors at sites mixed with 900 and 5.7 FSK on Rev i SB12's. >> UGPS power off = no data. The FSK radios are seeing data just fine. >> >> So yeah, seems obvious that it's ignoring the GPS data if UGPS power is >> off. >> >> >> On 8/31/2017 2:57 AM, Forrest Christian (List Account) wrote: >> >> I've had a chance tonight to spend some time validating a new GPS >> receiver with which adds GLONASS. Looking good w/much better sensitivity. >> Those of you who have been mentioning the desire for this don't have long >> to wait - 30 days or so, really depends on how long the GPS module stock >> lasts here. Rev K will have the new GPS modules. >> >> In the process I've discovered that cambium in 15.1.1 (or perhaps >> earlier) seems to have fixed a longstanding bug in the 450i that prevented >> reliable reception of GPS status information on the GPS status screen. >> >> However, I've also discovered that in order to get GPS status at all, you >> need uGPS power on, even for those devices such as a syncbox 12 which >> doesn't need uGPS power. >> >> For those of you running 15.1.1 on a 450i/450m, and a packetflux timing >> port sync device (aka a syncbox of some sort), I'm curious to find out if >> enabling uGPS power and enabling 'verify gps message checksum' results in a >> usable GPS status screen. Note that you'll need pin 3 on the syncbox >> connected to pin 4 on the 450i/m if you're using a timing port device (as >> opposed to a syncbox junior Aux Port version which just needs a straight >> through CAT5 cable.). >> >> >> >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> [email protected] | http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> >> >> > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > > >
