I am certain I have seen a camera enclosure that had a roll of something like saran wrap that you could either manually advance or perhaps it slowly advanced itself to keep the view clear. (Someone was asking about keeping the lens clean). I suppose you could also set one up to spray some cleaner followed by a blast of compressed air or CO2.
But yeah, having the camera or DVR be able to ignore certain areas of the frame is nice. I have a couple of systems like that. From: Lewis Bergman Sent: Thursday, August 31, 2017 3:00 PM To: Animal Farm Subject: Re: [AFMUG] Motion Detection sensitivity setting Damn spider webs, spiders, and birds. Hard to see in the daytime but drives the motion sense crazy on cameras. On Thu, Aug 31, 2017 at 1:23 PM Jaime Solorza <[email protected]> wrote: If sensitivity too low , nothing gets recorded. We had to reduce it during dust storm season Jaime Solorza On Aug 31, 2017 12:19 PM, "Josh Luthman" <[email protected]> wrote: Gen3 cameras are still picking up floor space that gets lit with a brighter screen on a TV. Sometimes bugs and stuff too, hard to fault that though. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Aug 31, 2017 at 12:22 AM, Josh Reynolds <[email protected]> wrote: Controller does, dunno if they are using that On Wed, Aug 30, 2017 at 11:19 PM, Steve Jones <[email protected]> wrote: > Does it support masking. We had a bear of a time at a factory til we > realised a clipboard that had paper onnit fluttered enoug from a fan to trip > md even though you couldnt really see it on the low res monitor. > > > On Aug 30, 2017 10:30 PM, "Mitch Koep" <[email protected]> wrote: > > Gen3 ? > > Gen 2s always had an issue for us the night vision would trip motion > > for fly s and mosquito s. > > We finally put a yellow lamp near the cam and bugs went away > > (grams remedy for bugs in MN at night) > > shocked as I was > > Mitch > > > > > On 8/30/2017 9:38 PM, Jaime Solorza wrote: >> >> One of the cameras at Fabens Waste Water Treatment Plant is triggering >> night time recordings that manager asked me investigate and minimize. I >> changed sensitivity to 15 from 50. But I doubt it will help. Airvision Pro >> Cameras. I will check video on Friday. Ideas? >> >> Jaime Solorza > > >
