I used the masque to ignore some areas...will know tomorrow. Jaime Solorza
On Aug 31, 2017 3:04 PM, "Chuck McCown" <[email protected]> wrote: > I am certain I have seen a camera enclosure that had a roll of something > like saran wrap that you could either manually advance or perhaps it slowly > advanced itself to keep the view clear. (Someone was asking about keeping > the lens clean). I suppose you could also set one up to spray some cleaner > followed by a blast of compressed air or CO2. > > But yeah, having the camera or DVR be able to ignore certain areas of the > frame is nice. I have a couple of systems like that. > > *From:* Lewis Bergman > *Sent:* Thursday, August 31, 2017 3:00 PM > *To:* Animal Farm > *Subject:* Re: [AFMUG] Motion Detection sensitivity setting > > Damn spider webs, spiders, and birds. Hard to see in the daytime but > drives the motion sense crazy on cameras. > > On Thu, Aug 31, 2017 at 1:23 PM Jaime Solorza <[email protected]> > wrote: > >> If sensitivity too low , nothing gets recorded. We had to reduce it >> during dust storm season >> >> >> Jaime Solorza >> >> On Aug 31, 2017 12:19 PM, "Josh Luthman" <[email protected]> >> wrote: >> >>> Gen3 cameras are still picking up floor space that gets lit with a >>> brighter screen on a TV. Sometimes bugs and stuff too, hard to fault that >>> though. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 <(937)%20552-2340> >>> Direct: 937-552-2343 <(937)%20552-2343> >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Thu, Aug 31, 2017 at 12:22 AM, Josh Reynolds <[email protected]> >>> wrote: >>> >>>> Controller does, dunno if they are using that >>>> >>>> On Wed, Aug 30, 2017 at 11:19 PM, Steve Jones < >>>> [email protected]> wrote: >>>> > Does it support masking. We had a bear of a time at a factory til we >>>> > realised a clipboard that had paper onnit fluttered enoug from a fan >>>> to trip >>>> > md even though you couldnt really see it on the low res monitor. >>>> > >>>> > >>>> > On Aug 30, 2017 10:30 PM, "Mitch Koep" <[email protected]> wrote: >>>> > >>>> > Gen3 ? >>>> > >>>> > Gen 2s always had an issue for us the night vision would trip motion >>>> > >>>> > for fly s and mosquito s. >>>> > >>>> > We finally put a yellow lamp near the cam and bugs went away >>>> > >>>> > (grams remedy for bugs in MN at night) >>>> > >>>> > shocked as I was >>>> > >>>> > Mitch >>>> > >>>> > >>>> > >>>> > >>>> > On 8/30/2017 9:38 PM, Jaime Solorza wrote: >>>> >> >>>> >> One of the cameras at Fabens Waste Water Treatment Plant is >>>> triggering >>>> >> night time recordings that manager asked me investigate and >>>> minimize. I >>>> >> changed sensitivity to 15 from 50. But I doubt it will help. >>>> Airvision Pro >>>> >> Cameras. I will check video on Friday. Ideas? >>>> >> >>>> >> Jaime Solorza >>>> > >>>> > >>>> > >>>> >>> >>> >>
