We don't have anything in the timing ports of our SMs other than the
occasional dead spider.

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Thu, Sep 7, 2017 at 12:17 PM, Sean Heskett <[email protected]> wrote:

> is there anything connected to the timing port of these radios??
>
> -sean
>
>
> On Thu, Sep 7, 2017 at 10:17 AM, Darren Shea <[email protected]> wrote:
>
>> Just wondering, if this is a problem which only bedevils me, or if other
>> people are seeing it:
>>
>>
>>
>> PMP450 SMs, running 15.0 or later f/w (it’s a question right now whether
>> the AP f/w is related to this, but it seems that the APs are usually
>> running 13.2 f/w)
>>
>>
>>
>> The symptom is the SM throws a bunch of "Deleting a timer since it was
>> active" errors, then some other errors, then it resets to factory defaults
>> and reboots (see below for typical Event log snippet). Sometimes, the radio
>> loses calibration data. Because we run our configurations as close as
>> possible to default in the first place, we can typically access the radio
>> via ICC and reconfigure it appropriately without a truck. However, and this
>> is a *huge* deal, some of these radios that had 10M keys are now
>> reverting to 4M keys! This is going to cause us major headaches.
>>
>>
>>
>> I have opened lines of communication with Cambium about this, but they
>> are giving me their standard “we haven’t heard about this” response which
>> is always their default up until they admit it’s a problem and start to
>> resolve it.  Have any of you encountered these issues?
>>
>>
>>
>> Typical Event Log snippet:
>>
>> 09/07/2017 : 01:26:19 CST : :Deleting a timer since it was active (T),
>> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>>
>> 09/07/2017 : 01:26:21 CST : :Deleting a timer since it was active (T),
>> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>>
>> 09/07/2017 : 01:26:23 CST : :Deleting a timer since it was active (T),
>> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>>
>> 09/07/2017 : 01:26:25 CST : :SNMP user; user=snmp; Reboot from SNMP;
>>
>> 09/07/2017 : 01:26:25 CST : :Deleting a timer since it was active (T),
>> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>>
>> 09/07/2017 : 01:26:27 CST : :SNMP user; user=snmp; Reboot from SNMP;
>>
>> 09/07/2017 : 01:26:27 CST : :Forced reset;
>>
>> 09/07/2017 : 01:26:27 CST : :Deleting a timer since it was active (T),
>> TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48, CurrentTask=48
>>
>> 01/01/2016 : 00:00:00 UTC : :
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[46], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[47], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[58], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[59], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[60], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[61], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[62], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : :CalParams[63], updating FPM, CalParams and
>> FPM mismatch!
>>
>> 01/01/1970 : 00:00:00 UTC : File src/cal_params.c : Li
>>
>> 01/01/2016 : 00:00:00 UTC :
>>
>> *******SYSTEM STARTUP*******
>>
>> System Reset Exception -- Watchdog Reset
>>
>> Software Version : CANOPY 15.0.2 SM-DES
>>
>> Board Type : P11
>>
>> Boot Bank : 0
>>
>> Board Temperature : 38 C / 101 F
>>
>> Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module -
>> 0a-00-3e-bx-yy-zz
>> No valid accounts configured. Using default user account
>>
>> FPGA Version : 061716
>>
>> FPGA Features : DES, Sched;
>>
>> 01/01/2016 : 00:00:00 UTC : 
>> :CalParams[46,47,58,59,60,61,62,63,64,65,66,67,68,72,76,77],
>> updated FPM, CalParams and FPM mismatch!
>>
>> FeatureKey mismatch for FKey[1]
>>
>> 12/31/2015 : 18:03:37 CST : :Timezone set to CST;
>>
>> 09/07/2017 : 01:30:24 CST : :Time Set
>>
>>
>>
>
>

Reply via email to