Losing calibration, license and config is without a doubt corrupt
flashes. You'll probably be better off swapping them.
On 9/7/2017 11:17 AM, Darren Shea wrote:
Just wondering, if this is a problem which only bedevils me, or if
other people are seeing it:
PMP450 SMs, running 15.0 or later f/w (it�s a question right now
whether the AP f/w is related to this, but it seems that the APs are
usually running 13.2 f/w)
The symptom is the SM throws a bunch of "Deleting a timer since it was
active" errors, then some other errors, then it resets to factory
defaults and reboots (see below for typical Event log snippet).
Sometimes, the radio loses calibration data. Because we run our
configurations as close as possible to default in the first place, we
can typically access the radio via ICC and reconfigure it
appropriately without a truck. However, and this is a *huge* deal,
some of these radios that had 10M keys are now reverting to 4M keys!
This is going to cause us major headaches.
I have opened lines of communication with Cambium about this, but they
are giving me their standard �we haven�t heard about this� response
which is always their default up until they admit it�s a problem and
start to resolve it. �Have any of you encountered these issues?
Typical Event Log snippet:
09/07/2017 : 01:26:19 CST : :Deleting a timer since it was active (T),
TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48,
CurrentTask=48
09/07/2017 : 01:26:21 CST : :Deleting a timer since it was active (T),
TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48,
CurrentTask=48
09/07/2017 : 01:26:23 CST : :Deleting a timer since it was active (T),
TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48,
CurrentTask=48
09/07/2017 : 01:26:25 CST : :SNMP user; user=snmp; Reboot from SNMP;
09/07/2017 : 01:26:25 CST : :Deleting a timer since it was active (T),
TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48,
CurrentTask=48
09/07/2017 : 01:26:27 CST : :SNMP user; user=snmp; Reboot from SNMP;
09/07/2017 : 01:26:27 CST : :Forced reset;
09/07/2017 : 01:26:27 CST : :Deleting a timer since it was active (T),
TimerId=0x5fa0c0 (0xac325c), TimerEvent=0x8, TimerTaskId=48,
CurrentTask=48
01/01/2016 : 00:00:00 UTC : :
01/01/1970 : 00:00:00 UTC : :CalParams[46], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[47], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[58], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[59], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[60], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[61], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[62], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : :CalParams[63], updating FPM, CalParams
and FPM mismatch!
01/01/1970 : 00:00:00 UTC : File src/cal_params.c : Li
01/01/2016 : 00:00:00 UTC :
*******SYSTEM STARTUP*******
System Reset Exception -- Watchdog Reset
Software Version : CANOPY 15.0.2 SM-DES
Board Type : P11
Boot Bank : 0
Board Temperature : 38 C / 101 F
Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module -
0a-00-3e-bx-yy-zz
No valid accounts configured. Using default user account
FPGA Version : 061716
FPGA Features : DES, Sched;
01/01/2016 : 00:00:00 UTC :
:CalParams[46,47,58,59,60,61,62,63,64,65,66,67,68,72,76,77], updated
FPM, CalParams and FPM mismatch!
FeatureKey mismatch for FKey[1]
12/31/2015 : 18:03:37 CST : :Timezone set to CST;
09/07/2017 : 01:30:24 CST : :Time Set
