Ignitenet uses 2 Ghz channels, so there are only three channels available, but a vendor representative has stated that you can reuse frequencies in an ABAB pattern. Of note is that even if it has 16 beams of 10 degrees, it can only support 8 clients. It's unclear whether a later upgrade to 32 clients requires new hardware or not. The 2.5G bandwidth is aggregate, so you cannot do more than 1G symmetrical. Asymmetric speeds are supported.
Website and datasheet: https://www.ignitenet.com/products/ml-2-5g-60-bf-sector/ https://www.ignitenet.com/wp-content/uploads/2017/09/MetroLinq-2.5G-60-BF-sector-datasheet.pdf Jared Sent: Sunday, October 01, 2017 From: "Ryan Ray" <[email protected]> To: "[email protected]" <[email protected]> Subject: [AFMUG] MetroLinq 2.5G 60-BF-18 (120 Degree Sector) Searched around and didn't see anyone talking about these. Do they work? Can I put three of these up channels 2,3,4 and have 360 degree gigabit coverage in 60GHz? Any gotcha's I need to know? Does frequency reuse work? Same range as the existing point to point model? So many applications if this is all the case.
