Quick simple fix would be to create some sort of a stand-off and use longer screws to bolt the radio in place.
Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "Chuck McCown" <[email protected]> > To: [email protected] > Sent: Thursday, October 5, 2017 12:09:49 PM > Subject: Re: [AFMUG] Fw: AF11x adapters > I will supply them in all future shipments. > From: Gino A. Villarini > Sent: Thursday, October 05, 2017 10:08 AM > To: [email protected] > Subject: Re: [AFMUG] Fw: AF11x adapters > Just clarified, the plastic adapter does not come with the radio, will need to > retool base to use holes in metal adapter > From: Af < [email protected] > on behalf of Jeremy < > [email protected] > > Reply-To: " [email protected] " < [email protected] > > Date: Thursday, October 5, 2017 at 11:33 AM > To: " [email protected] " < [email protected] > > Subject: Re: [AFMUG] Fw: AF11x adapters > They sell it in a set with the 11GHz Type-N cables. Streakwave has some in > stock. AF-11CA $52 > Gino A. Villarini > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz < [email protected] > > wrote: >> Hmmm... in that case.. the question would be... How do you mount the radio to >> the Adapter plate. >> There needs to be a mateing adapter on your plate side... That piece only >> comes >> with the UBNT Dish... >> (you can pull up the UBNT 10ghz Dish Userguide to see that ...) >> Jiruos adapters that we used, required that piece to be removed from the >> AF11x >> so that it could be screwed in directly (as per my picture). I was told that >> they were going to redesign so that they would have a mateing bracket on >> their >> side so that the AF11x would slide in. >> (You will also need to have to include cables to connect to AF11x to the Feed >> horn .. I am sure you already knew that). >> Regards >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>> From: [email protected] >>> To: [email protected] >>> Sent: Thursday, October 5, 2017 10:45:45 AM >>> Subject: Re: [AFMUG] Fw: AF11x adapters >>> No because my design presumes the adapter will be there to space the radio >>> out >>> away from the end of the waveguide transition. Without that extra spacing >>> the >>> radio would crash into the end of the adapter. >>> From: Mathew Howard >>> Sent: Thursday, October 5, 2017 8:42 AM >>> To: af >>> Subject: Re: [AFMUG] Fw: AF11x adapters >>> Wouldn't it work without the adapter anyway? If I'm remembering right, with >>> the >>> Jirous adapters, you take the snap adapter off and just bolt the radio >>> directly >>> to their mounting plate using the same holes... wouldn't that line up with >>> your >>> adapter too? >>> On Thu, Oct 5, 2017 at 9:33 AM, < [email protected] > wrote: >>>> If that plastic slide/snap adapter is included with each radio, then we >>>> should >>>> be good. >>>> I designed the spacing and everything assuming that adapter would be used >>>> with >>>> each unit. >>>> From: Faisal Imtiaz >>>> Sent: Thursday, October 5, 2017 8:28 AM >>>> To: [email protected] >>>> Subject: Re: [AFMUG] Fw: AF11x adapters >>>> Picture of the Jirous Adapter attached.... >>>> rest of the answers are inline below. >>>> If you have any questions, feel free to call me. >>>> Regards. >>>> Faisal Imtiaz >>>> Snappy Internet & Telecom >>>> 7266 SW 48 Street >>>> Miami, FL 33155 >>>> Tel: 305 663 5518 x 232 >>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>>>> From: "Chuck McCown" < [email protected] > >>>>> To: [email protected] >>>>> Sent: Thursday, October 5, 2017 8:58:26 AM >>>>> Subject: [AFMUG] Fw: AF11x adapters >>>>> Made Gino some adapters so he can use AF11x radios on Remec mount >>>>> antennas. >>>>> I made the hole pattern to match a plastic slide and snap adapter that >>>>> came with >>>>> the radio I have. >>>> That should be fine >>>>> But not sure if that part is included with all AF11X radios. Gino is >>>>> asking >>>>> about how the radio is supposed to mount to my adapter. >>>>> If the slide/snap is not automatically included in all shipments, I need >>>>> to >>>>> alter the bolt pattern to allow mounting of the radio when that part is >>>>> not >>>>> present. He needs some more of these adapters and I want to make sure to >>>>> send >>>>> him stuff that does not require any work on his part. >>>>> Do you AF11X users know if that slid/snap adapter plate is included with >>>>> all >>>>> radios? >>>> Yes that slide/snap adapter is included with each of the AF11x (That is >>>> how they >>>> slide/attach to the UBNT dishes). >>>>> If so, can we buy more for Gino to use right now in the event he has lost >>>>> his? >>>>> If not how should I alter the mount so the radio can still fit onto the >>>>> adapter?
