They sell it in a set with the 11GHz Type-N cables. Streakwave has some in stock. AF-11CA $52
On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <[email protected]> wrote: > Hmmm... in that case.. the question would be... How do you mount the radio > to the Adapter plate. > > There needs to be a mateing adapter on your plate side... That piece only > comes with the UBNT Dish... > > (you can pull up the UBNT 10ghz Dish Userguide to see that ...) > > Jiruos adapters that we used, required that piece to be removed from the > AF11x so that it could be screwed in directly (as per my picture). I was > told that they were going to redesign so that they would have a mateing > bracket on their side so that the AF11x would slide in. > > (You will also need to have to include cables to connect to AF11x to the > Feed horn .. I am sure you already knew that). > > Regards > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> > Miami, FL 33155 > <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> > Tel: 305 663 5518 x 232 <(305)%20663-5518> > > Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: > [email protected] > > ------------------------------ > > *From: *[email protected] > *To: *[email protected] > *Sent: *Thursday, October 5, 2017 10:45:45 AM > *Subject: *Re: [AFMUG] Fw: AF11x adapters > > No because my design presumes the adapter will be there to space the radio > out away from the end of the waveguide transition. Without that extra > spacing the radio would crash into the end of the adapter. > > *From:* Mathew Howard > *Sent:* Thursday, October 5, 2017 8:42 AM > *To:* af > *Subject:* Re: [AFMUG] Fw: AF11x adapters > > Wouldn't it work without the adapter anyway? If I'm remembering right, > with the Jirous adapters, you take the snap adapter off and just bolt the > radio directly to their mounting plate using the same holes... wouldn't > that line up with your adapter too? > > On Thu, Oct 5, 2017 at 9:33 AM, <[email protected]> wrote: > >> If that plastic slide/snap adapter is included with each radio, then we >> should be good. >> I designed the spacing and everything assuming that adapter would be used >> with each unit. >> >> *From:* Faisal Imtiaz >> *Sent:* Thursday, October 5, 2017 8:28 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Fw: AF11x adapters >> >> Picture of the Jirous Adapter attached.... >> >> rest of the answers are inline below. >> >> If you have any questions, feel free to call me. >> >> Regards. >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> >> Miami, FL 33155 >> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> >> Tel: 305 663 5518 <(305)%20663-5518> x 232 >> >> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: >> [email protected] >> >> ------------------------------ >> >> *From: *"Chuck McCown" <[email protected]> >> *To: *[email protected] >> *Sent: *Thursday, October 5, 2017 8:58:26 AM >> *Subject: *[AFMUG] Fw: AF11x adapters >> >> >> Made Gino some adapters so he can use AF11x radios on Remec mount >> antennas. >> I made the hole pattern to match a plastic slide and snap adapter that >> came with the radio I have. >> >> That should be fine >> >> But not sure if that part is included with all AF11X radios. Gino is >> asking about how the radio is supposed to mount to my adapter. >> If the slide/snap is not automatically included in all shipments, I need >> to alter the bolt pattern to allow mounting of the radio when that part is >> not present. He needs some more of these adapters and I want to make sure >> to send him stuff that does not require any work on his part. >> Do you AF11X users know if that slid/snap adapter plate is included with >> all radios? >> >> Yes that slide/snap adapter is included with each of the AF11x (That is >> how they slide/attach to the UBNT dishes). >> >> If so, can we buy more for Gino to use right now in the event he has lost >> his? If not how should I alter the mount so the radio can still fit onto >> the adapter? >> >> > >
