I had something similar .... was fixed by doing a firmware update... Go figure !
Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "Nate Burke" <[email protected]> > To: [email protected] > Sent: Friday, October 6, 2017 9:35:27 PM > Subject: Re: [AFMUG] Airfiber 24HD One Chain Bad? > Correction, it was only doing it for a week. > On 10/6/2017 8:33 PM, Nate Burke wrote: >> I've had this happen on 3 or 4 AF24 (not HD) radios. One time you could >> physically hear something rattling around inside the radome. Another time, >> power cycle of the unit fixed it. This last time, I had a radio do this for 3 >> weeks, then suddenly one day, it started working normally again (power cycle >> did not fix it in this case). All different physical units, always the same >> symptom, a single chain in a single direction loses like 15-20 db of signal. >> On 10/6/2017 8:22 PM, Mathew Howard wrote: >>> Seems kind of odd for it to be off by that much on only one chain in only >>> one >>> direction, if it was an alignment issue... I'd suspect a broken radio. >>> On Oct 6, 2017 7:49 PM, "George Skorup" < [email protected] > wrote: >>>> Could be bad Rx or possibly Tx at the opposite end. Or alignment like this >>>> one I >>>> have, which I know one end is slightly out and I just haven't bothered >>>> fixing >>>> it yet. Probably end up going 18GHz on this anyway, because >1 mile and >>>> 24GHz >>>> sucks here. >>>> On 10/6/2017 7:35 PM, Sterling Jacobson wrote: >>>>> Not sure why it didn't attach the picture, let me try again. >>>>> -----Original Message----- >>>>> From: Af [ mailto:[email protected] ] On Behalf Of Sterling Jacobson >>>>> Sent: Friday, October 6, 2017 6:29 PM >>>>> To: ' [email protected] ' <[email protected]> Subject: [AFMUG] Airfiber 24HD One >>>>> Chain >>>>> Bad? >>>>> How do I fix a link where just one chain is bad as shown here? >>>>> Not quite sure what to make of this.
