What do you think the problem here is?  We had to replace a PMP 100 900 MHz access point earlier in the week and now the Session and Reg counts seem very high but there are no (zero) Re-Regs on any of the clients.  I could blame it on interference or timing but the zero Re-Regs confuses me.  The AP uptime when I took this information was 26 hours and we're using Packeflux timing.  We are also using a new Sync Injector but a used Sync Pipe.

LUID: 002 - [0a-00-3e-93-07-8c] State: IN SESSION (Encrypt Disabled)
      Site Name: , Darlene
      Software Version: CANOPY 12.1
      FPGA Version: 111010 (DES, Sched, US/ETSI) P10
      Session Timeout: 0, AirDelay: 70200 ns, 234 bits (approximately 6.534 miles (34503 feet))
      Session Count: 295, Reg Count: 295, Re-Reg Count: 0, Session Uptime: 02:41:03
     
LUID: 003 - [0a-00-3e-93-61-03] State: IN SESSION (Encrypt Disabled)
      Site Name: , Scottie
      Software Version: CANOPY 12.1
      FPGA Version: 111010 (DES, Sched, US/ETSI) P10
      Session Timeout: 0, AirDelay: 3300 ns, 11 bits (approximately 0.307 miles (1621 feet))
      Session Count: 43, Reg Count: 43, Re-Reg Count: 0, Session Uptime: 03:19:04
      Jitter (Avg/Last): 8/9   Power Level (Avg/Last): -56/-56
   
      Rate: VC 19 Rate 2X/2X       
LUID: 004 - [0a-00-3e-92-47-84] State: IN SESSION (Encrypt Disabled)
      Site Name: , Jeff
      Software Version: CANOPY 12.1
      FPGA Version: 101410 (DES, Sched, US/ETSI) P9
      Session Timeout: 0, AirDelay: 28500 ns, 95 bits (approximately 2.652 miles (14007 feet))
      Session Count: 252, Reg Count: 252, Re-Reg Count: 0, Session Uptime: 02:45:22
     
LUID: 005 - [0a-00-3e-91-9f-9b] State: IN SESSION (Encrypt Disabled)
      Site Name: , Joseph
      Software Version: CANOPY 12.1
      FPGA Version: 101410 (DES, Sched, US/ETSI) P9
      Session Timeout: 0, AirDelay: 9300 ns, 31 bits (approximately 0.865 miles (4570 feet))
      Session Count: 41, Reg Count: 41, Re-Reg Count: 0, Session Uptime: 03:18:41
          
LUID: 006 - [0a-00-3e-93-08-16] State: IN SESSION (Encrypt Disabled)
      Site Name: , Steve
      Software Version: CANOPY 12.1
      FPGA Version: 111010 (DES, Sched, US/ETSI) P10
      Session Timeout: 0, AirDelay: 20100 ns, 67 bits (approximately 1.871 miles (9879 feet))
      Session Count: 328, Reg Count: 328, Re-Reg Count: 0, Session Uptime: 02:43:56
     
LUID: 007 - [0a-00-3e-93-61-8d] State: IN SESSION (Encrypt Disabled)
      Site Name: , Ben
      Software Version: CANOPY 11.2
      FPGA Version: 111010 (DES, Sched, US/ETSI) P10
      Session Timeout: 0, AirDelay: 81900 ns, 273 bits (approximately 7.623 miles (40253 feet))
      Session Count: 382, Reg Count: 382, Re-Reg Count: 0, Session Uptime: 02:37:09
     
LUID: 008 - [0a-00-3e-94-e5-39] State: IN SESSION (Encrypt Disabled)
      Site Name: , Regina
      Software Version: CANOPY 12.1
      FPGA Version: 111010 (DES, Sched, US/ETSI) P10
      Session Timeout: 0, AirDelay: 17100 ns, 57 bits (approximately 1.591 miles (8404 feet))
      Session Count: 35, Reg Count: 35, Re-Reg Count: 0, Session Uptime: 03:18:38
    

Reply via email to