Hah ok, yeah non-issue then.
------ Original Message ------
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: 1/9/2018 3:00:07 PM
Subject: Re: [AFMUG] Reel payoff equipment
Maybe 36” for drop, depending on the type of drop.
From:Adam Moffett
Sent: Tuesday, January 09, 2018 12:58 PM
To:af@afmug.com
Subject: Re: [AFMUG] Reel payoff equipment
On second pass, I was probably picturing a 40,000 foot reel being
bigger than it really is.
------ Original Message ------
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: 1/9/2018 2:08:40 PM
Subject: Re: [AFMUG] Reel payoff equipment
Yes, just pull it off at the job site. Or if you have a good idea on
lengths, make hand coils.
From:Adam Moffett
Sent: Tuesday, January 09, 2018 12:04 PM
To:af@afmug.com
Subject: Re: [AFMUG] Reel payoff equipment
Do you just spin the reel by hand to spool out what you need?
------ Original Message ------
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: 1/9/2018 1:41:37 PM
Subject: Re: [AFMUG] Reel payoff equipment
We just use the large reel. Get a reel holder that you can pull
behind a vehicle.
From:Adam Moffett
Sent: Tuesday, January 09, 2018 10:50 AM
To:af@afmug.com
Subject: [AFMUG] Reel payoff equipment
As I'm getting into larger quantities of fiber, I'm finding that I
will get the best pricing on 40,000 ft reels of drop cable.
If we do that, then I'll need some kind of payoff system to transfer
cable onto smaller spools for field techs. I have no idea where to
begin shopping for that, but I'm betting somebody here has been down
this road before. What should I be looking at?
