AP? No-go past 7.36. No HW scheduling. No Free cheeze From: Af [mailto:[email protected]] On Behalf Of Gilbert Gutierrez Sent: Wednesday, January 10, 2018 12:27 PM To: [email protected] Subject: Re: [AFMUG] OLD FSK Equipment
Telnet+> version Software Version : CANOPY 7.3.6 Oct 24 2005 12:06:56 APAS-DES Software Boot Version : CANOPYBOOT 3.0 FPGA Version : 051104 FPGA Features : Single, 40MHz ExtBus, DES, Frequency Band : 5.7GHz Hardware Platform : 8 Hardware Minor Revision : 0 Device Type : CANOPY MIR Cap : 7000 (kbit) CIR Cap : 20000 (kbit) P8 On Wed, Jan 10, 2018 at 10:20 AM, Paul McCall <[email protected]<mailto:[email protected]>> wrote: You can actually use CNUT to make a P8 to HW scheduling -----Original Message----- From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Bill Prince Sent: Wednesday, January 10, 2018 12:16 PM To: [email protected]<mailto:[email protected]>; Gilbert Gutierrez <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] OLD FSK Equipment How old? If it's a P8, you're screwed. P9 and up can do HW scheduling. bp <part15sbs{at}gmail{dot}com> On 1/10/2018 9:12 AM, Gilbert Gutierrez wrote: > I am trying to convert an old FSK 100 from software scheduled to > hardware scheduled but am hitting a wall. > > When I run the Advantage Platform Scheduler, here are my symptoms... > 1. The AP is listed as Unable to Communicate/Extract info from Element > in the tool 2. When I select the element, I can run the switch but it > pauses after ftp and asks for a password. When I insert the password, > the tool responds "Completed" and the log says ERROR: Failed Telnet to > x.x.x.x > > I am using CNUT 4.10. The AP and the package file are 7.3.6. I am > wondering if I have to use a much older version CNUT. It has been so > long since I have done this. Does anyone have pointers besides replace > the very old equipment (I will be doing this spring)? > > Gilbert
