[AFMUG] CCR1032 to CRS125 Fiber

[Nate Burke]

I tried to move a Multimode 1g fiber that was running on a RB260GS to a 
CCR1032 8G-2S+.  I moved the mikrotik branded SFP from the 260 to the 
CCR, so I know the SFP is good.  The SFP was recognized, and the phy 
link was reporting up, but I had no RX traffic.  The remote end of the 
fiber is on a CRS125.  I tried to fiddle with all the interface settings 
I could on the CCR, but nothing worked.  I moved the SFP back to the 
260, and the fiber is still passing traffic normally.  Any thoughts on 
Settings that were keeping traffic from moving.