I've had to set the CCR to 1Gbps FDX (not auto negotiate) in the past to get a link to come up. Worth a try if you haven't changed that setting as of yet.
On Thursday, January 11, 2018, Nate Burke <[email protected]> wrote: > I tried to move a Multimode 1g fiber that was running on a RB260GS to a > CCR1032 8G-2S+. I moved the mikrotik branded SFP from the 260 to the CCR, > so I know the SFP is good. The SFP was recognized, and the phy link was > reporting up, but I had no RX traffic. The remote end of the fiber is on a > CRS125. I tried to fiddle with all the interface settings I could on the > CCR, but nothing worked. I moved the SFP back to the 260, and the fiber is > still passing traffic normally. Any thoughts on Settings that were keeping > traffic from moving. >
