That's not strictly necessary. Even HP traffic beyond the HP CIR gets
higher than standard priority.
.....but I do it the same way you do it.
------ Original Message ------
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Sent: 1/12/2018 3:24:26 PM
Subject: Re: [AFMUG] 450i VOIP priority.
You also should set the amount of traffic you want to dedicate to the
high priority channel. We typically use 130 Kbps, which will run most
VoIP traffic.
bp
<part15sbs{at}gmail{dot}com>
On 1/12/2018 12:21 PM, Adam Moffett wrote:
It is equally simple.
Click Configuration -> QoS
Enable the Hi Priority Channel. Done.
If you leave everything else alone, then you've just done the same
thing as enabling VoIP Priority on ePMP. You *can* do more stuff, but
maybe you don't need to.
I can't remember, but you might have to do it on the AP and SM.
------ Original Message ------
From: "Jerry Head" <li...@blountbroadband.com>
To: af@afmug.com
Sent: 1/12/2018 2:38:31 PM
Subject: [AFMUG] 450i VOIP priority.
I would like to prioritize VOIP on a 450i customer.
Don't really know how to do that.
On ePMP it is just 3 clicks, does not look that simple
on the 450.
Help please?
