These as well.
On Feb 9, 2018 8:42 PM, "Jaime Solorza" <losguyswirel...@gmail.com> wrote:
> We use these sometimes in enclosures to hold wires tied down with wire
> ties especially inside our cable management systems. If required we also
> screw them into back panels. https://www.google.com/search?
> On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>> That's robbery
>> ------ Original Message ------
>> From: "Steve Jones" <thatoneguyst...@gmail.com>
>> To: firstname.lastname@example.org
>> Sent: 2/9/2018 8:59:11 PM
>> Subject: Re: [AFMUG] tying down wires
>> it works but they run 40 some bucks around here
>> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net>
>>> I’ve been looking for a solution like this. Neat idea. One of our guys
>>> is basically trying to 3d print something like this
>>> Jon Langeler
>>> Michwave Technologies, Inc.
>>> On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
>>> I wonder if I put one of these in the box:
>>> with the screws removed, if that would be a suitable thing to tie off
>>> cables coming into the box to?
>>> (not sure the image will come through)