I was getting rally mad at packetflux a few weeks ago on a powerinjector,
Radios wouldnt poewer up, had to open in the field (pita) to doublecheck
pins..... then I realized some dumbass put the power on pwr2...


Im that dumbass btw

On Mon, Feb 12, 2018 at 10:49 AM, Mathew Howard <mhoward...@gmail.com>
wrote:

> Yes, that should be correct. either port can be set to power A or power B
> with the jumpers, but I think they are all on A by default.
>
> On Mon, Feb 12, 2018 at 10:48 AM, Jay Weekley <par...@cyberbroadband.net>
> wrote:
>
>> Where do the wires do into the connector?  I assume red to power a and
>> black to common. Is that correct?
>>
>>
>>
>> Sent from my Verizon 4G LTE smartphone
>>
>>
>> -------- Original message --------
>> From: Mathew Howard <mhoward...@gmail.com>
>> Date: 2/12/18 10:46 AM (GMT-06:00)
>> To: af <af@afmug.com>
>> Subject: Re: [AFMUG] Sync injector power supply setup
>>
>> What do you need help with? If I remember correctly, the jumper settings
>> should be right for a PMP100 the way it comes.
>>
>> On Mon, Feb 12, 2018 at 10:33 AM, Jay Weekley <par...@cyberbroadband.net>
>> wrote:
>>
>>> Help! I am in the field and  need to setup sync injector power supply.
>>> It's the 10 /100 to be used with pmp100.
>>>
>>>
>>>
>>> Sent from my Verizon 4G LTE smartphone
>>>
>>
>>
>

Reply via email to