Apples and oranges. Different processor architectures can accomplish
different amounts of work per instruction cycle. Even different RISC
processors have different work/MHz ratios.
Above my pay grade to parse it out.
bp
<part15sbs{at}gmail{dot}com>
On 2/14/2018 9:14 AM, Nate Burke wrote:
When comparing Mikrotik capability, is a MHZ a MHZ. I.E. For a single
CPU application, like a bandwidth test or Interface bridging. Will a
x86 CPU at 1000mhz perform the same as a CCR CPU at 1000mhz? I have
some older ATOM based routers that are 2 core hyperthreaded at 1.6
ghz. I'm trying to figure out if they can route packets faster or
slower than a CCR1009. Especially bridging an EoIP Tunnel to an
Ethernet interface.
